PartsTable
Technical Data Sheet
Download PDF

LTW7300-10-G-6 — SCREW ASSEMBLY,PANEL

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

LTW7300-10-G-6: SCREW ASSEMBLY,PANEL.

The SCREW ASSEMBLY,PANEL is a the manufacturer industrial component. Key specifications include material: STEEL PRIMARY WASHER, head_style: HEXAGON, head_height: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN, thread_class: 3A A, thread_length: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN, fastener_length: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-429-7291, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LTW7300-10-G-6
NSN: 5305-01-429-7291
FSC: 5305 — Screws
CAGE: 17446 — HUCK INTERNATIONAL, INC (USA)
SPECIFICATIONS
materialSTEEL PRIMARY WASHER
head_styleHEXAGON
head_height0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
thread_class3A A
thread_length0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
fastener_length0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
special_featuresCAPTIVATING BUSHING: STEEL QQ-S-764, CLASS 303; PASSIVATED, QQ-P-35: SHEAR BUSHING: STEEL 17-4PH, AMS 5622; PASSIVATED, QQ-P-35; SLEEVE: STEEL, QQ-S-763, CLASS 304; PASSIVATED QQ-P-35
thread_directionRIGHT-HAND
surface_treatmentCADMIUM AND CHROMATE PRIMARY WASHER
width_across_flats0.142 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN
width_between_flats0.244 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
NSN5305-01-429-7291
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: LTW7300-10-G-6 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.142 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
•
MATERIAL ACCOMMODATED THICKNESS: 0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.142 INCHES MINIMUM AND 0.144 INCHES MAXIMUM IN
HEAD HEIGHT0.134 INCHES MINIMUM AND 0.138 INCHES MAXIMUM IN
FASTENER LENGTH0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE SPRING
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416, TYPE 2, CLASS 2 FED SPEC ALL TREATMENT RESPONSES PRIMARY WASHER
MATERIAL ACCOMMODATED THICKNESS0.219 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
THREAD LENGTH0.290 INCHES MINIMUM AND 0.310 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE SECONDARY WASHER
MATERIAL DOCUMENT AND CLASSIFICATIONAMS5734 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5735 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
583R579H72Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy LTW7300-10-G-6?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LTW7300-10-G-6?
LTW7300-10-G-6 is a SCREW ASSEMBLY,PANEL.
What parts can replace LTW7300-10-G-6?
There is 1 known substitute for LTW7300-10-G-6: 583R579H72. Substitute compatibility should be verified for your specific system.
What is the NSN for LTW7300-10-G-6?
LTW7300-10-G-6 is cataloged in the U.S. Government catalog under NSN 5305-01-429-7291. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LTW7300-10-G-6

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.