PartsTable
Technical Data Sheet
Download PDF

LSF02080-001 — BRACKET,SHELF

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

LSF02080-001: BRACKET,SHELF.

The BRACKET,SHELF is a the manufacturer industrial component. Key specifications include angle: 0.38 RADIANS NOMINAL, material: ALUMINUM ALLOY 2024, first_leg_length: 4.760 INCHES NOMINAL IN, second_leg_length: 11.000 INCHES NOMINAL IN, material_thickness: 0.063 INCHES NOMINAL IN, end_item_identification: 1520-01-355-8250. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-579-2929, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LSF02080-001
NSN: 5340-01-579-2929
FSC: 5340 — Hardware, Commercial
CAGE: 1K9E4 — STRATA-G SOLUTIONS LLC (USA)
SPECIFICATIONS
angle0.38 RADIANS NOMINAL
materialALUMINUM ALLOY 2024
first_leg_length4.760 INCHES NOMINAL IN
second_leg_length11.000 INCHES NOMINAL IN
material_thickness0.063 INCHES NOMINAL IN
end_item_identification1520-01-355-8250
material_document_and_classificationQQ-A-250/4 FED SPEC SINGLE MATERIAL RESPONSE
NSN5340-01-579-2929
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: LSF02080-001 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG LENGTH: 11.000 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-250/4 FED SPEC SINGLE MATERIAL RESPONSE
•
ANGLE: 0.38 RADIANS NOMINAL
•
MATERIAL THICKNESS: 0.063 INCHES NOMINAL IN
•
FIRST LEG LENGTH: 4.760 INCHES NOMINAL IN
•
MATERIAL: ALUMINUM ALLOY 2024
TECHNICAL CHARACTERISTICS
SECOND LEG LENGTH11.000 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-A-250/4 FED SPEC SINGLE MATERIAL RESPONSE
ANGLE0.38 RADIANS NOMINAL
MATERIAL THICKNESS0.063 INCHES NOMINAL IN
FIRST LEG LENGTH4.760 INCHES NOMINAL IN
END ITEM IDENTIFICATION1520-01-355-8250
MATERIALALUMINUM ALLOY 2024
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 1
LSF02080Reference document
Same NSN cross-reference
Reference document — Drawing number reference only
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy LSF02080-001?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LSF02080-001?
LSF02080-001 is a BRACKET,SHELF.
What parts can replace LSF02080-001?
There is 1 known substitute for LSF02080-001: LSF02080. Substitute compatibility should be verified for your specific system.
What is the NSN for LSF02080-001?
LSF02080-001 is cataloged in the U.S. Government catalog under NSN 5340-01-579-2929. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LSF02080-001