PartsTable
Technical Data Sheet
PartsTable / COMPONENT / LSCP270215-15
LSCP270215-15 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

CAP,PROTECTIVE,DUST AND MOISTURE. Key specifications include overall_diameter: 2.500 INCHES NOMINAL IN, special_features: CAP PLUG ON CHARGE PUMP; UP ASSEMBLY LSCP270215-2, supplementary_features: NO CADMIUM PLATED HARDWARE SHALL BE USED, end_item_identification: M-1 ABRAMS TANK CHASSIS AND LAUNCHER FOR HEAVY ASSAULT BRIDGE; 5420-01-430-5403, specification/standard_data: 96906-MIL-STD-100E GOVERNMENT STANDARD AND 80204-ANSI-Y14.5M-1982 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-485-8441, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LSCP270215-15
NSN: 5340-01-485-8441
FSC: 5340
CAGE: 01417 — GENERAL DYNAMICS LAND SYSTEMS INC. (USA)
SPECIFICATIONS
overall_diameter2.500 INCHES NOMINAL IN
special_featuresCAP PLUG ON CHARGE PUMP; UP ASSEMBLY LSCP270215-2
supplementary_featuresNO CADMIUM PLATED HARDWARE SHALL BE USED
end_item_identificationM-1 ABRAMS TANK CHASSIS AND LAUNCHER FOR HEAVY ASSAULT BRIDGE; 5420-01-430-5403
specification/standard_data96906-MIL-STD-100E GOVERNMENT STANDARD AND 80204-ANSI-Y14.5M-1982 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
NSN5340-01-485-8441
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: LSCP270215-15 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SUPPLEMENTARY FEATURES: NO CADMIUM PLATED HARDWARE SHALL BE USED
•
OVERALL DIAMETER: 2.500 INCHES NOMINAL IN
•
SPECIFICATION/STANDARD DATA: 96906-MIL-STD-100E GOVERNMENT STANDARD AND 80204-ANSI-Y14.5M-1982 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
TECHNICAL CHARACTERISTICS (FLIS)
END ITEM IDENTIFICATIONM-1 ABRAMS TANK CHASSIS AND LAUNCHER FOR HEAVY ASSAULT BRIDGE; 5420-01-430-5403
SUPPLEMENTARY FEATURESNO CADMIUM PLATED HARDWARE SHALL BE USED
OVERALL DIAMETER2.500 INCHES NOMINAL IN
SPECIFICATION/STANDARD DATA96906-MIL-STD-100E GOVERNMENT STANDARD AND 80204-ANSI-Y14.5M-1982 PROFESSIONAL/INDUSTRIAL ASSOCIATION STANDARD
SPECIAL FEATURESCAP PLUG ON CHARGE PUMP; UP ASSEMBLY LSCP270215-2
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
108-0062-00Interchangeable
interchangeable cross-reference
interchangeable
108-062Interchangeable
interchangeable cross-reference
interchangeable
227MT029P008Interchangeable
interchangeable cross-reference
interchangeable
1012-2Interchangeable
interchangeable cross-reference
interchangeable
120-1012-02-01-00Interchangeable
interchangeable cross-reference
interchangeable
20-13-1Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy LSCP270215-15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LSCP270215-15?
LSCP270215-15 is a CAP,PROTECTIVE,DUST AND MOISTURE.
What parts can replace LSCP270215-15?
There are 12 known substitutes for LSCP270215-15: 108-0062-00, 108-062, 227MT029P008 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for LSCP270215-15?
LSCP270215-15 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5340-01-485-8441. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LSCP270215-15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026