PartsTable
Technical Data Sheet
Download PDF

LSCP270212 — PIN,STRAIGHT,HEADLESS

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

LSCP270212: PIN,STRAIGHT,HEADLESS.

The PIN,STRAIGHT,HEADLESS is a the manufacturer industrial component. Key specifications include first_end_style: CHAMFERED, pin_overall_length: 9.940 INCHES MINIMUM AND 10.060 INCHES MAXIMUM IN, first_hole_diameter: 0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN, second_hole_diameter: 0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN, first_end_taper_angle: 45.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM, hole_arrangement_style: BOTH END DRILLED. This part is cataloged in the U.S.

Government catalog under NSN 5315-01-507-1901, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LSCP270212
NSN: 5315-01-507-1901
FSC: 5315 — Nails, Machine Keys, and Pins
CAGE: 01417 — GENERAL DYNAMICS LAND SYSTEMS INC. (USA)
SPECIFICATIONS
first_end_styleCHAMFERED
pin_overall_length9.940 INCHES MINIMUM AND 10.060 INCHES MAXIMUM IN
first_hole_diameter0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
second_hole_diameter0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
first_end_taper_angle45.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
hole_arrangement_styleBOTH END DRILLED
end_item_identificationTANK, ABRAMS M-1
material_document_and_classificationASTM A576 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
second_end_relationship_with_first_endIDENTICAL
center_to_center_distance_between_holes7.970 INCHES MINIMUM AND 8.030 INCHES MAXIMUM IN
distance_from_centerline_of_hole_to_end_of_pin1.000 INCHES NOMINAL IN
NSN5315-01-507-1901
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: LSCP270212 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE ARRANGEMENT STYLE: BOTH END DRILLED
•
FIRST END STYLE: CHAMFERED
•
FIRST HOLE DIAMETER: 0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ASTM A576 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
FIRST END TAPER ANGLE: 45.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
•
PIN OVERALL LENGTH: 9.940 INCHES MINIMUM AND 10.060 INCHES MAXIMUM IN
•
SECOND END RELATIONSHIP WITH FIRST END: IDENTICAL
•
SECOND HOLE DIAMETER: 0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HOLE ARRANGEMENT STYLEBOTH END DRILLED
FIRST END STYLECHAMFERED
FIRST HOLE DIAMETER0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONASTM A576 ASSN STD SINGLE MATERIAL RESPONSE OR ASTM A108 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
FIRST END TAPER ANGLE45.0 DEGREES MINIMUM AND 50.0 DEGREES MAXIMUM
PIN OVERALL LENGTH9.940 INCHES MINIMUM AND 10.060 INCHES MAXIMUM IN
SECOND END RELATIONSHIP WITH FIRST ENDIDENTICAL
SECOND HOLE DIAMETER0.131 INCHES MINIMUM AND 0.151 INCHES MAXIMUM IN
CENTER TO CENTER DISTANCE BETWEEN HOLES7.970 INCHES MINIMUM AND 8.030 INCHES MAXIMUM IN
END ITEM IDENTIFICATIONTANK, ABRAMS M-1
OTHER ITEMS IN FSC 5315 — Nails, Machine Keys, and Pins
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5315-00-000-1037 5315-00-000-1067 5315-00-000-1245 5315-00-000-1372 5315-00-000-1412 5315-00-001-1571 5315-00-001-1572 5315-00-001-1602
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy LSCP270212?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LSCP270212?
LSCP270212 is a PIN,STRAIGHT,HEADLESS.
What is the NSN for LSCP270212?
LSCP270212 is cataloged in the U.S. Government catalog under NSN 5315-01-507-1901. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LSCP270212

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.