PartsTable
Technical Data Sheet
Download PDF

LS9378-10 — SCREW,ASSEMBLED WASHER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

LS9378-10: SCREW,ASSEMBLED WASHER.

The SCREW,ASSEMBLED WASHER is a the manufacturer industrial component. Key specifications include head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.333 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN, thread_length: 0.542 INCHES NOMINAL IN, fastener_length: 0.625 INCHES NOMINAL IN, thread_direction: RIGHT-HAND. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-940-9308, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LS9378-10
NSN: 5305-00-940-9308
FSC: 5305 — Screws
CAGE: 1AW87 — LEWIS SCREW CO DIV OF MEDALIST FASTENERS INC (USA)
SPECIFICATIONS
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.333 INCHES MINIMUM AND 0.385 INCHES MAXIMUM IN
thread_length0.542 INCHES NOMINAL IN
fastener_length0.625 INCHES NOMINAL IN
washer_quantity1
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
thread_quantity_per_inch32
thread_series_designatorUNF
NSN5305-00-940-9308
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: LS9378-10 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.625 INCHES NOMINAL IN
•
PRIMARY WASHER OUTSIDE DIAMETER: 0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
•
THREAD LENGTH: 0.542 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
PRIMARY WASHER MATERIAL THICKNESS: 0.022 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.625 INCHES NOMINAL IN
PRIMARY WASHER OUTSIDE DIAMETER0.740 INCHES MINIMUM AND 0.760 INCHES MAXIMUM IN
THREAD LENGTH0.542 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
PRIMARY WASHER MATERIAL THICKNESS0.022 INCHES MINIMUM AND 0.028 INCHES MAXIMUM IN
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
THREAD CLASS3A A
SUBSTITUTES & CROSS-REFERENCES 2
AR-2529ERReference document
Same NSN cross-reference
Reference document — Secondary reference
CA3105-1032-10Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy LS9378-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LS9378-10?
LS9378-10 is a SCREW,ASSEMBLED WASHER.
What parts can replace LS9378-10?
There are 2 known substitutes for LS9378-10: AR-2529ER, CA3105-1032-10. Substitute compatibility should be verified for your specific system.
What is the NSN for LS9378-10?
LS9378-10 is cataloged in the U.S. Government catalog under NSN 5305-00-940-9308. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LS9378-10