PartsTable
Technical Data Sheet
Download PDF

LS9367C05-2-7 — SCREW,ASSEMBLED WASHER

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

LS9367C05-2-7: SCREW,ASSEMBLED WASHER.

The SCREW,ASSEMBLED WASHER is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FLAT COUNTERSUNK, thread_class: 3A A, head_diameter: 0.285 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN, thread_length: 0.366 INCHES NOMINAL IN, fastener_length: 0.438 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-498-7017, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LS9367C05-2-7
NSN: 5305-00-498-7017
FSC: 5305 — Screws
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFLAT COUNTERSUNK
thread_class3A A
head_diameter0.285 INCHES MINIMUM AND 0.332 INCHES MAXIMUM IN
thread_length0.366 INCHES NOMINAL IN
fastener_length0.438 INCHES NOMINAL IN
washer_quantity1
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
internal_drive_styleCROSS RECESS TYPE 1
primary_washer_styleFLAT EXTERNAL TEETH
nominal_thread_diameter0.164 INCHES IN
NSN5305-00-498-7017
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: LS9367C05-2-7 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.438 INCHES NOMINAL IN
•
THREAD LENGTH: 0.366 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.164 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
PRIMARY WASHER STYLE: FLAT EXTERNAL TEETH
•
THREAD DIRECTION: RIGHT-HAND
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
•
COUNTERSINK ANGLE: 100.0 DEGREES NOMINAL
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.438 INCHES NOMINAL IN
THREAD LENGTH0.366 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.164 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
PRIMARY WASHER STYLEFLAT EXTERNAL TEETH
THREAD DIRECTIONRIGHT-HAND
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
THREAD CLASS3A A
THREAD QUANTITY PER INCH32
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
AN515-10-24Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy LS9367C05-2-7?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LS9367C05-2-7?
LS9367C05-2-7 is a SCREW,ASSEMBLED WASHER.
What parts can replace LS9367C05-2-7?
There is 1 known substitute for LS9367C05-2-7: AN515-10-24. Substitute compatibility should be verified for your specific system.
What is the NSN for LS9367C05-2-7?
LS9367C05-2-7 is cataloged in the U.S. Government catalog under NSN 5305-00-498-7017. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LS9367C05-2-7

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.