PartsTable
Technical Data Sheet
Download PDF

LS5988-27016 — BRACKET,ANGLE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

LS5988-27016: BRACKET,ANGLE.

The BRACKET,ANGLE is a the manufacturer industrial component. Key specifications include material: TITANIUM ALLOY, first_leg_angle: 90.0 DEGREES NOMINAL, first_leg_style: CORNER RADIUS, first_leg_width: 0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN, first_leg_length: 0.870 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN, second_leg_style: CORNER RADIUS. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-494-7595, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LS5988-27016
NSN: 5340-00-494-7595
FSC: 5340 — Hardware, Commercial
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
materialTITANIUM ALLOY
first_leg_angle90.0 DEGREES NOMINAL
first_leg_styleCORNER RADIUS
first_leg_width0.970 INCHES MINIMUM AND 1.030 INCHES MAXIMUM IN
first_leg_length0.870 INCHES MINIMUM AND 0.930 INCHES MAXIMUM IN
second_leg_styleCORNER RADIUS
second_leg_width1.930 INCHES MINIMUM AND 2.110 INCHES MAXIMUM IN
style_designatorANGLE
second_leg_length1.090 INCHES MINIMUM AND 1.150 INCHES MAXIMUM IN
surface_treatmentCHROMATE ZINC
first_leg_thickness0.016 INCHES NOMINAL IN
second_leg_thickness0.016 INCHES NOMINAL IN
NSN5340-00-494-7595
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: LS5988-27016 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
•
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH: 0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
•
FIRST LEG HOLE DIAMETER: 0.227 INCHES MINIMUM AND 0.233 INCHES MAXIMUM IN
•
FIRST LEG ANGLE: 90.0 DEGREES NOMINAL
•
SECOND LEG RELATIONSHIP TO FIRST LEG: NOT IDENTICAL
•
SECOND LEG HOLE DIAMETER: 0.128 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: TT-P-1757 FED SPEC SINGLE TREATMENT RESPONSE
•
FIRST LEG CORNER RADIUS: 0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SECOND LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
FIRST LEG DISTANCE FROM EDGE TO HOLE CENTER ALONG LENGTH0.380 INCHES MINIMUM AND 0.440 INCHES MAXIMUM IN
FIRST LEG HOLE DIAMETER0.227 INCHES MINIMUM AND 0.233 INCHES MAXIMUM IN
FIRST LEG ANGLE90.0 DEGREES NOMINAL
SECOND LEG RELATIONSHIP TO FIRST LEGNOT IDENTICAL
SECOND LEG HOLE DIAMETER0.128 INCHES MINIMUM AND 0.134 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONTT-P-1757 FED SPEC SINGLE TREATMENT RESPONSE
FIRST LEG CORNER RADIUS0.280 INCHES MINIMUM AND 0.340 INCHES MAXIMUM IN
SECOND LEG WIDTH1.930 INCHES MINIMUM AND 2.110 INCHES MAXIMUM IN
SECOND LEG LENGTH1.090 INCHES MINIMUM AND 1.150 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES 2
LS5988-2T016Reference document
Same NSN cross-reference
Reference document — Secondary reference
LS5377-6TSame NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy LS5988-27016?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LS5988-27016?
LS5988-27016 is a BRACKET,ANGLE.
What parts can replace LS5988-27016?
There are 2 known substitutes for LS5988-27016: LS5988-2T016, LS5377-6T. Substitute compatibility should be verified for your specific system.
What is the NSN for LS5988-27016?
LS5988-27016 is cataloged in the U.S. Government catalog under NSN 5340-00-494-7595. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LS5988-27016

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.