LS5102 — SUPPORT,STRUCTURAL COMPONENT,AIR

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

LS5102: SUPPORT,STRUCTURAL COMPONENT,AIR.

SUPPORT,STRUCTURAL COMPONENT,AIR. Key specifications include length: 1.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT, material: ALUMINUM ALLOY 7075, leg_thickness: 0.094 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN, heat_treatment: T-6 SOLUTION HEAT TREATED, overall_height: 1.794 INCHES MINIMUM AND 1.826 INCHES MAXIMUM IN, first_tip_style: SQUARE W/ INNER AND OUTER CORNER RADII. This part is cataloged in the U.S.

Government catalog under NSN 9540-00-526-2678, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

LS5102

NSN: 9540-00-526-2678
FSC: 9540 — Structural Shapes, Nonferrous Base Metal
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)

SPECIFICATIONS

length	1.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
material	ALUMINUM ALLOY 7075
leg_thickness	0.094 INCHES MINIMUM AND 0.106 INCHES MAXIMUM IN
heat_treatment	T-6 SOLUTION HEAT TREATED
overall_height	1.794 INCHES MINIMUM AND 1.826 INCHES MAXIMUM IN
first_tip_style	SQUARE W/ INNER AND OUTER CORNER RADII
top_flange_width	2.296 INCHES MINIMUM AND 2.344 INCHES MAXIMUM IN
basic_shape_style	T SHAPE
fabrication_method	EXTRUDED
left_top_inside_angle	98.2 DEGREES NOMINAL
first_tip_inner_radius	0.014 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
first_tip_outer_radius	0.014 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
NSN	9540-00-526-2678

COMPONENT DIAGRAM

KEY FEATURES

•

FIRST TIP INNER RADIUS: 0.014 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN

•

RIGHT SIDE TOP FLANGE THICKNESS: 0.372 INCHES MINIMUM AND 0.388 INCHES MAXIMUM IN

•

LENGTH: 1.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT

•

LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES: 0.841 INCHES MINIMUM AND 0.881 INCHES MAXIMUM IN

•

RIGHT TOP INSIDE ANGLE: 81.8 DEGREES NOMINAL

•

LEFT TOP INSIDE ANGLE: 98.2 DEGREES NOMINAL

•

HEAT TREATMENT: T-6 SOLUTION HEAT TREATED

TECHNICAL CHARACTERISTICS

FIRST TIP INNER RADIUS	0.014 INCHES MINIMUM AND 0.046 INCHES MAXIMUM IN
OVERALL HEIGHT	1.794 INCHES MINIMUM AND 1.826 INCHES MAXIMUM IN
RIGHT SIDE TOP FLANGE THICKNESS	0.372 INCHES MINIMUM AND 0.388 INCHES MAXIMUM IN
LENGTH	1.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	0.841 INCHES MINIMUM AND 0.881 INCHES MAXIMUM IN
RIGHT TOP INSIDE ANGLE	81.8 DEGREES NOMINAL
LEFT TOP INSIDE ANGLE	98.2 DEGREES NOMINAL
HEAT TREATMENT	T-6 SOLUTION HEAT TREATED
FILLET RADIUS WHERE TOP RIGHT FLANGE JOINS WEB FLANGE/LEG	0.109 INCHES MINIMUM AND 0.141 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE

SUBSTITUTES & CROSS-REFERENCES 3

61049Same NSN cross-reference

Same NSN cross-reference

Also cataloged under this NSN

QQA200-11Reference document

Same NSN cross-reference

Reference document — Secondary reference

AMS-QQ-A-200/11Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy LS5102?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is LS5102?

LS5102 is a SUPPORT,STRUCTURAL COMPONENT,AIR.

What parts can replace LS5102?

There are 3 known substitutes for LS5102: 61049, QQA200-11, AMS-QQ-A-200/11. Substitute compatibility should be verified for your specific system.

What is the NSN for LS5102?

LS5102 is cataloged in the U.S. Government catalog under NSN 9540-00-526-2678. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

LS5102 — SUPPORT,STRUCTURAL COMPONENT,AIR

Request a Quote — LS5102