PartsTable / COMPONENT / LS402
LS402
✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW
The SOCKET,SOCKET WRENCH is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_length: 3.500 INCHES NOMINAL IN, drive_end_shape: SQUARE SINGLE END INTERNAL, outside_diameter: 0.452 INCHES NOMINAL IN, special_features: DEEP LENGTH, style_designator: INTERNAL-INTERNAL. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-186-4945, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
LS402
NSN: 5330-00-186-4945 FSC: 5330 CAGE: 73680 — GARLOCK SEALING TECHNOLOGIES LLC DBA GARLOCK SEALING TECHNOLOGIES LLC (USA)
SPECIFICATIONS
material STEEL OVERALL overall_length 3.500 INCHES NOMINAL IN drive_end_shape SQUARE SINGLE END INTERNAL outside_diameter 0.452 INCHES NOMINAL IN special_features DEEP LENGTH style_designator INTERNAL-INTERNAL aperture_diameter 0.227 INCHES MINIMUM AND 0.241 INCHES MAXIMUM IN features_provided MANUAL TOOL surface_treatment CHROMIUM OVERALL drive_surface_size 0.750 INCHES NOMINAL SINGLE END IN wrenching_surface_size 1.250 INCHES NOMINAL SINGLE END IN wrenching_surface_shape 6 POINT SINGLE END INTERNAL NSN 5330-00-186-4945
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION
ID: —
CROSS-SECTION
CS: —
SPECIFICATION
Material: —
Durometer: —
Temp: —
PN: LS402
MFR: OEM
⚠ VERIFY BEFORE ORDERING
Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade.
Chemical incompatibility causes swelling, brittleness, or rapid degradation
✓ BROKER TIP
Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure.
Standard durometer is 70A — verify if application requires different hardness
PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
• OUTSIDE DIAMETER: 0.452 INCHES NOMINAL IN
• CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
• APERTURE DIAMETER: 0.227 INCHES MINIMUM AND 0.241 INCHES MAXIMUM IN
• MATERIAL: LEATHER CATTLEHIDE OVERALL
• CROSS-SECTIONAL THICKNESS: 0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN
• STYLE DESIGNATOR: CIRCULAR
• MATERIAL DOCUMENT AND CLASSIFICATION: MIL-W-5521 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
OUTSIDE DIAMETER 0.452 INCHES NOMINAL IN CROSS-SECTIONAL SHAPE STYLE SOLID SINGLE OR COMPOSITION APERTURE DIAMETER 0.227 INCHES MINIMUM AND 0.241 INCHES MAXIMUM IN MATERIAL LEATHER CATTLEHIDE OVERALL CROSS-SECTIONAL THICKNESS 0.084 INCHES MINIMUM AND 0.104 INCHES MAXIMUM IN STYLE DESIGNATOR CIRCULAR MATERIAL DOCUMENT AND CLASSIFICATION MIL-W-5521 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 19
133690 Interchangeable interchangeable cross-reference
interchangeable
12831 Interchangeable interchangeable cross-reference
interchangeable
G2106D008 Interchangeable interchangeable cross-reference
interchangeable
5547A62 Interchangeable interchangeable cross-reference
interchangeable
LS402 Interchangeable interchangeable cross-reference
interchangeable
B2054-211 Interchangeable interchangeable cross-reference
interchangeable
LIFECYCLE
Status CANCELLED
Availability —
RoHS Compliant EAR99 Not HAZMAT
Ready to buy LS402?
Compare prices from verified sellers on eBay
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LS402?
LS402 is a SOCKET,SOCKET WRENCH.
What parts can replace LS402?
There are 19 known substitutes for LS402: 133690, 12831, G2106D008 and 16 more. Substitute compatibility should be verified for your specific system.
Is LS402 still available?
LS402 is currently cancelled.