LS3912 — SUPPORT,STRUCTURAL COMPONENT,AIR

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

LS3912: SUPPORT,STRUCTURAL COMPONENT,AIR.

SUPPORT,STRUCTURAL COMPONENT,AIR. Key specifications include length: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT, material: ALUMINUM ALLOY 7075, overall_width: 1.750 INCHES NOMINAL IN, heat_treatment: T-6 SOLUTION HEAT TREATED OR T-6511 SOLUTION HEAT TREATED, overall_height: 1.750 INCHES NOMINAL IN, first_tip_style: SQUARE W/ INNER AND OUTER CORNER RADII. This part is cataloged in the U.S.

Government catalog under NSN 9540-01-003-7624, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

LS3912

NSN: 9540-01-003-7624
FSC: 9540 — Structural Shapes, Nonferrous Base Metal
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)

SPECIFICATIONS

length	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
material	ALUMINUM ALLOY 7075
overall_width	1.750 INCHES NOMINAL IN
heat_treatment	T-6 SOLUTION HEAT TREATED OR T-6511 SOLUTION HEAT TREATED
overall_height	1.750 INCHES NOMINAL IN
first_tip_style	SQUARE W/ INNER AND OUTER CORNER RADII
basic_shape_style	ANGLE
left_inside_angle	90.0 DEGREES NOMINAL
fabrication_method	EXTRUDED
base_flange_thickness	0.190 INCHES NOMINAL IN
first_tip_inner_radius	0.032 INCHES NOMINAL IN
first_tip_outer_radius	0.032 INCHES NOMINAL IN
NSN	9540-01-003-7624

COMPONENT DIAGRAM

KEY FEATURES

•

FIRST TIP INNER RADIUS: 0.032 INCHES NOMINAL IN

•

LENGTH: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT

•

BASE FLANGE THICKNESS: 0.190 INCHES NOMINAL IN

•

HEAT TREATMENT: T-6 SOLUTION HEAT TREATED OR T-6511 SOLUTION HEAT TREATED

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE

•

LEFT SIDE FLANGE THICKNESS: 0.190 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

FIRST TIP INNER RADIUS	0.032 INCHES NOMINAL IN
OVERALL HEIGHT	1.750 INCHES NOMINAL IN
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
BASE FLANGE THICKNESS	0.190 INCHES NOMINAL IN
HEAT TREATMENT	T-6 SOLUTION HEAT TREATED OR T-6511 SOLUTION HEAT TREATED
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-Q-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL WIDTH	1.750 INCHES NOMINAL IN
LEFT SIDE FLANGE THICKNESS	0.190 INCHES NOMINAL IN
BASIC SHAPE STYLE	ANGLE
WEIGHT PER UNIT MEASURE	0.769 POUNDS PER LINEAR FOOT LBS

SUBSTITUTES & CROSS-REFERENCES 5

AMS-QQ-A-200/11Reference document

Same NSN cross-reference

Reference document — Secondary reference

60-27133Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

17663Reference document

Same NSN cross-reference

Reference document — Secondary reference

AMS4154Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

QQ-A-200/11Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy LS3912?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is LS3912?

LS3912 is a SUPPORT,STRUCTURAL COMPONENT,AIR.

What parts can replace LS3912?

There are 5 known substitutes for LS3912: AMS-QQ-A-200/11, 60-27133, 17663 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for LS3912?

LS3912 is cataloged in the U.S. Government catalog under NSN 9540-01-003-7624. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

LS3912 — SUPPORT,STRUCTURAL COMPONENT,AIR

Request a Quote — LS3912