PartsTable
Technical Data Sheet
Download PDF

LS37824-1 — HINGE,TEE

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

LS37824-1: HINGE,TEE.

The HINGE,TEE is a the manufacturer industrial component. Key specifications include knuckle_type: FRICTION, knuckle_length: 0.311 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN, performance_type: NOT RATED, end_knuckle_length: 0.311 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN, reversible_feature: NOT INCLUDED, hinge_mounting_type: FULL MORTISE. This part is cataloged in the U.S.

Government catalog under NSN 5340-01-348-8636, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LS37824-1
NSN: 5340-01-348-8636
FSC: 5340 — Hardware, Commercial
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
knuckle_typeFRICTION
knuckle_length0.311 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
performance_typeNOT RATED
end_knuckle_length0.311 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
reversible_featureNOT INCLUDED
hinge_mounting_typeFULL MORTISE
knuckle_inside_diameter0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
NSN5340-01-348-8636
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: LS37824-1 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
REVERSIBLE FEATURE: NOT INCLUDED
•
KNUCKLE INSIDE DIAMETER: 0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
•
HINGE MOUNTING TYPE: FULL MORTISE
•
END KNUCKLE LENGTH: 0.311 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
•
KNUCKLE LENGTH: 0.311 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
•
KNUCKLE TYPE: FRICTION
•
PERFORMANCE TYPE: NOT RATED
TECHNICAL CHARACTERISTICS
REVERSIBLE FEATURENOT INCLUDED
KNUCKLE INSIDE DIAMETER0.093 INCHES MINIMUM AND 0.098 INCHES MAXIMUM IN
HINGE MOUNTING TYPEFULL MORTISE
END KNUCKLE LENGTH0.311 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
KNUCKLE LENGTH0.311 INCHES MINIMUM AND 0.315 INCHES MAXIMUM IN
KNUCKLE TYPEFRICTION
PERFORMANCE TYPENOT RATED
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5340-00-000-0068 5340-00-000-0132 5340-00-000-8150 5340-00-001-1251 5340-00-001-1264 5340-00-001-1265 5340-00-001-1266 5340-00-001-1275
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy LS37824-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LS37824-1?
LS37824-1 is a HINGE,TEE.
What is the NSN for LS37824-1?
LS37824-1 is cataloged in the U.S. Government catalog under NSN 5340-01-348-8636. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LS37824-1

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.