LS3572 — BRACKET,VEHICULAR COMPONENTS

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

LS3572: BRACKET,VEHICULAR COMPONENTS.

The BRACKET,VEHICULAR COMPONENTS is a the manufacturer industrial component. Key specifications include length: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT, material: ALUMINUM ALLOY 2024, overall_width: 0.750 INCHES NOMINAL IN, heat_treatment: O-ANNEALED, overall_height: 0.750 INCHES NOMINAL IN, first_tip_style: SQUARE END. This part is cataloged in the U.S.

Government catalog under NSN 9540-00-145-8388, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

LS3572

NSN: 9540-00-145-8388
FSC: 9540 — Structural Shapes, Nonferrous Base Metal
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)

SPECIFICATIONS

length	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
material	ALUMINUM ALLOY 2024
overall_width	0.750 INCHES NOMINAL IN
heat_treatment	O-ANNEALED
overall_height	0.750 INCHES NOMINAL IN
first_tip_style	SQUARE END
basic_shape_style	ANGLE
left_inside_angle	90.0 DEGREES NOMINAL
base_flange_thickness	0.063 INCHES NOMINAL IN
weight_per_unit_measure	0.110 POUNDS PER LINEAR FOOT LBS
left_side_flange_thickness	0.063 INCHES NOMINAL IN
nondefinitive_spec/std_data	2024 ALLOY AND O TEMPER
NSN	9540-00-145-8388

COMPONENT DIAGRAM

KEY FEATURES

•

LENGTH: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT

•

BASE FLANGE THICKNESS: 0.063 INCHES NOMINAL IN

•

HEAT TREATMENT: O-ANNEALED

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS-QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE

•

LEFT SIDE FLANGE THICKNESS: 0.063 INCHES NOMINAL IN

•

BASIC SHAPE STYLE: ANGLE

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	0.750 INCHES NOMINAL IN
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
BASE FLANGE THICKNESS	0.063 INCHES NOMINAL IN
HEAT TREATMENT	O-ANNEALED
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL WIDTH	0.750 INCHES NOMINAL IN
LEFT SIDE FLANGE THICKNESS	0.063 INCHES NOMINAL IN
BASIC SHAPE STYLE	ANGLE
WEIGHT PER UNIT MEASURE	0.110 POUNDS PER LINEAR FOOT LBS
FILLET RADIUS WHERE LEFT FLANGE JOINS BASE FLANGE	0.063 INCHES NOMINAL IN

SUBSTITUTES & CROSS-REFERENCES 8

E111105Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

ASTM B221Reference document

Same NSN cross-reference

Reference document — Secondary reference

PA5545Reference document

Same NSN cross-reference

Reference document — Secondary reference

10262Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

QQ-A-200/3Reference document

Same NSN cross-reference

Reference document — Secondary reference

AMS-QQ-A-200/3Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy LS3572?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is LS3572?

LS3572 is a BRACKET,VEHICULAR COMPONENTS.

What parts can replace LS3572?

There are 8 known substitutes for LS3572: E111105, ASTM B221, PA5545 and 5 more. Substitute compatibility should be verified for your specific system.

What is the NSN for LS3572?

LS3572 is cataloged in the U.S. Government catalog under NSN 9540-00-145-8388. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

LS3572 — BRACKET,VEHICULAR COMPONENTS

Request a Quote — LS3572