LS32741-1 — SUPPORT,STRUCTURAL COMPONENT,AIR

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

LS32741-1: SUPPORT,STRUCTURAL COMPONENT,AIR.

SUPPORT,STRUCTURAL COMPONENT,AIR. Key specifications include length: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT, material: ALUMINUM ALLOY 7075, usage_design: STRUCTURAL, overall_width: 2.000 INCHES NOMINAL IN, heat_treatment: T-6511 SOLUTION HEAT TREATED, overall_height: 2.000 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 9540-00-005-6348, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

LS32741-1

NSN: 9540-00-005-6348
FSC: 9540 — Structural Shapes, Nonferrous Base Metal
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)

SPECIFICATIONS

length	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
material	ALUMINUM ALLOY 7075
usage_design	STRUCTURAL
overall_width	2.000 INCHES NOMINAL IN
heat_treatment	T-6511 SOLUTION HEAT TREATED
overall_height	2.000 INCHES NOMINAL IN
first_tip_style	SQUARE END
basic_shape_style	ANGLE
left_inside_angle	90.0 DEGREES NOMINAL
base_flange_thickness	0.070 INCHES NOMINAL IN
weight_per_unit_measure	0.331 POUNDS PER LINEAR FOOT LBS
left_side_flange_thickness	0.070 INCHES NOMINAL IN
NSN	9540-00-005-6348

COMPONENT DIAGRAM

KEY FEATURES

•

LENGTH: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT

•

BASE FLANGE THICKNESS: 0.070 INCHES NOMINAL IN

•

USAGE DESIGN: STRUCTURAL

•

HEAT TREATMENT: T-6511 SOLUTION HEAT TREATED

•

MATERIAL DOCUMENT AND CLASSIFICATION: QQ-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE

•

LEFT SIDE FLANGE THICKNESS: 0.070 INCHES NOMINAL IN

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	2.000 INCHES NOMINAL IN
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
BASE FLANGE THICKNESS	0.070 INCHES NOMINAL IN
USAGE DESIGN	STRUCTURAL
HEAT TREATMENT	T-6511 SOLUTION HEAT TREATED
MATERIAL DOCUMENT AND CLASSIFICATION	QQ-A-200/11 FED SPEC SINGLE MATERIAL RESPONSE
OVERALL WIDTH	2.000 INCHES NOMINAL IN
LEFT SIDE FLANGE THICKNESS	0.070 INCHES NOMINAL IN
BASIC SHAPE STYLE	ANGLE
WEIGHT PER UNIT MEASURE	0.331 POUNDS PER LINEAR FOOT LBS

SUBSTITUTES & CROSS-REFERENCES 5

PA22187Reference document

Same NSN cross-reference

Reference document — Secondary reference

QQ-A-200/11Reference document

Same NSN cross-reference

Reference document — Secondary reference

ASTM B221Reference document

Same NSN cross-reference

Reference document — Secondary reference

AMS-QQ-A-200/11Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

191635Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy LS32741-1?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is LS32741-1?

LS32741-1 is a SUPPORT,STRUCTURAL COMPONENT,AIR.

What parts can replace LS32741-1?

There are 5 known substitutes for LS32741-1: PA22187, QQ-A-200/11, ASTM B221 and 2 more. Substitute compatibility should be verified for your specific system.

What is the NSN for LS32741-1?

LS32741-1 is cataloged in the U.S. Government catalog under NSN 9540-00-005-6348. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

LS32741-1 — SUPPORT,STRUCTURAL COMPONENT,AIR

Request a Quote — LS32741-1