PartsTable
Technical Data Sheet
Download PDF

LS15267V3-50 — SCREW,MACHINE

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

LS15267V3-50: SCREW,MACHINE.

The SCREW,MACHINE is a the manufacturer industrial component. Key specifications include head_style: HEXAGON, head_height: 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN, thread_class: 3A A, thread_length: 1.750 INCHES NOMINAL IN, screw_material: TITANIUM ALLOY UNS R54520, fastener_length: 3.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-505-2802, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LS15267V3-50
NSN: 5305-00-505-2802
FSC: 5305 — Screws
CAGE: 98897 — LOCKHEED MARTIN CORP (USA)
SPECIFICATIONS
head_styleHEXAGON
head_height0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
thread_class3A A
thread_length1.750 INCHES NOMINAL IN
screw_materialTITANIUM ALLOY UNS R54520
fastener_length3.125 INCHES NOMINAL IN
thread_directionRIGHT-HAND
width_between_flats0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.190 INCHES IN
thread_quantity_per_inch32
thread_series_designatorUNIFIED NATIONAL JOINT FINE (UNJF)
NSN5305-00-505-2802
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: LS15267V3-50 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
FASTENER LENGTH: 3.125 INCHES NOMINAL IN
•
SCREW MATERIAL DOCUMENT AND CLASSIFICATION: NAS621,COMP 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE V
•
THREAD LENGTH: 1.750 INCHES NOMINAL IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: HEXAGON
•
THREAD DIRECTION: RIGHT-HAND
•
WIDTH BETWEEN FLATS: 0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.105 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
FASTENER LENGTH3.125 INCHES NOMINAL IN
SCREW MATERIAL DOCUMENT AND CLASSIFICATIONNAS621,COMP 6AL-4V ASSN STD SINGLE MATERIAL RESPONSE V
THREAD LENGTH1.750 INCHES NOMINAL IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEHEXAGON
THREAD DIRECTIONRIGHT-HAND
WIDTH BETWEEN FLATS0.305 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
SCREW MATERIALTITANIUM ALLOY UNS R54520
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
SUBSTITUTES & CROSS-REFERENCES 1
AN515-6-4Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy LS15267V3-50?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LS15267V3-50?
LS15267V3-50 is a SCREW,MACHINE.
What parts can replace LS15267V3-50?
There is 1 known substitute for LS15267V3-50: AN515-6-4. Substitute compatibility should be verified for your specific system.
What is the NSN for LS15267V3-50?
LS15267V3-50 is cataloged in the U.S. Government catalog under NSN 5305-00-505-2802. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LS15267V3-50

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.