LS043-0762 — BEAM,STRUCTURAL

✓ Government record, cited

— · COMPONENT

PRODUCT OVERVIEW

LS043-0762: BEAM,STRUCTURAL.

The BEAM,STRUCTURAL is a the manufacturer industrial component. Key specifications include length: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT, material: ALUMINUM ALLOY 2024, leg_thickness: 0.080 INCHES NOMINAL IN, heat_treatment: T-3511 SOLUTION HEAT TREATED, overall_height: 1.500 INCHES NOMINAL IN, top_flange_width: 3.750 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 9540-01-494-7775, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

LS043-0762

NSN: 9540-01-494-7775
FSC: 9540 — Structural Shapes, Nonferrous Base Metal
CAGE: 43999 — THE BOEING COMPANY DIV LEGACY AM&M (USA)

SPECIFICATIONS

length	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
material	ALUMINUM ALLOY 2024
leg_thickness	0.080 INCHES NOMINAL IN
heat_treatment	T-3511 SOLUTION HEAT TREATED
overall_height	1.500 INCHES NOMINAL IN
top_flange_width	3.750 INCHES NOMINAL IN
basic_shape_style	T SHAPE
fabrication_method	EXTRUDED
right_top_inside_angle	86.0 DEGREES NOMINAL
end_item_identification	B1-B AIRCRAFT
left_side_top_flange_thickness	0.080 INCHES NOMINAL IN
right_side_top_flange_thickness	0.080 INCHES NOMINAL IN
NSN	9540-01-494-7775

COMPONENT DIAGRAM

KEY FEATURES

•

RIGHT SIDE TOP FLANGE THICKNESS: 0.080 INCHES NOMINAL IN

•

LENGTH: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT

•

LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES: 2.312 INCHES NOMINAL IN

•

RIGHT TOP INSIDE ANGLE: 86.0 DEGREES NOMINAL

•

HEAT TREATMENT: T-3511 SOLUTION HEAT TREATED

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS-QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE

•

BASIC SHAPE STYLE: T SHAPE

TECHNICAL CHARACTERISTICS

OVERALL HEIGHT	1.500 INCHES NOMINAL IN
RIGHT SIDE TOP FLANGE THICKNESS	0.080 INCHES NOMINAL IN
LENGTH	10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
LEFT SIDE TOP FLANGE DISTANCE TO CENTER OF BOTH FLANGES	2.312 INCHES NOMINAL IN
RIGHT TOP INSIDE ANGLE	86.0 DEGREES NOMINAL
HEAT TREATMENT	T-3511 SOLUTION HEAT TREATED
MATERIAL DOCUMENT AND CLASSIFICATION	AMS-QQ-A-200/3 FED SPEC SINGLE MATERIAL RESPONSE
BASIC SHAPE STYLE	T SHAPE
TOP FLANGE WIDTH	3.750 INCHES NOMINAL IN
END ITEM IDENTIFICATION	B1-B AIRCRAFT

SUBSTITUTES & CROSS-REFERENCES 2

AMS-QQ-A-200/3Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

60-8169Reference document

Same NSN cross-reference

Reference document — Design control — primary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandDemilitarization required — mutilation + specific procedure

Ready to buy LS043-0762?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is LS043-0762?

LS043-0762 is a BEAM,STRUCTURAL.

What parts can replace LS043-0762?

There are 2 known substitutes for LS043-0762: AMS-QQ-A-200/3, 60-8169. Substitute compatibility should be verified for your specific system.

What is the NSN for LS043-0762?

LS043-0762 is cataloged in the U.S. Government catalog under NSN 9540-01-494-7775. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

LS043-0762 — BEAM,STRUCTURAL

Request a Quote — LS043-0762