PartsTable
Technical Data Sheet
PartsTable / COMPONENT / LS-40-28
LS-40-28 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

SUPPORT,STRUCTURAL COMPONENT,AIR. Key specifications include length: 10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT, material: ALUMINUM ALLOY 7075, leg_thickness: 0.094 INCHES NOMINAL IN, heat_treatment: T-6 SOLUTION HEAT TREATED, overall_height: 1.000 INCHES NOMINAL IN, first_tip_style: SQUARE END. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-186-1300, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LS-40-28
NSN: 5330-00-186-1300
FSC: 5330
CAGE: 73680 — GARLOCK SEALING TECHNOLOGIES LLC DBA GARLOCK SEALING TECHNOLOGIES LLC (USA)
SPECIFICATIONS
length10.000 FEET MINIMUM AND 12.000 FEET MAXIMUM FT
materialALUMINUM ALLOY 7075
leg_thickness0.094 INCHES NOMINAL IN
heat_treatmentT-6 SOLUTION HEAT TREATED
overall_height1.000 INCHES NOMINAL IN
first_tip_styleSQUARE END
top_flange_width1.500 INCHES NOMINAL IN
basic_shape_styleT SHAPE
fabrication_methodEXTRUDED
peripheral_diameter2.451 INCHES NOMINAL IN
center_hole_diameter2.102 INCHES MINIMUM AND 2.116 INCHES MAXIMUM IN
left_top_inside_angle90.0 DEGREES NOMINAL
NSN5330-00-186-1300
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: LS-40-28 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
PERIPHERAL DIAMETER: 2.451 INCHES NOMINAL IN
•
CROSS-SECTIONAL SHAPE STYLE: SQUARE/RECTANGULAR
•
CENTER HOLE DIAMETER: 2.102 INCHES MINIMUM AND 2.116 INCHES MAXIMUM IN
•
CROSS-SECTIONAL HEIGHT: 0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
•
MATERIAL: LEATHER CATTLEHIDE OVERALL
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-W-5521 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
TECHNICAL CHARACTERISTICS (FLIS)
PERIPHERAL DIAMETER2.451 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESQUARE/RECTANGULAR
CENTER HOLE DIAMETER2.102 INCHES MINIMUM AND 2.116 INCHES MAXIMUM IN
CROSS-SECTIONAL HEIGHT0.115 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
MATERIALLEATHER CATTLEHIDE OVERALL
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-W-5521 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
VERIFIED SUBSTITUTES & CROSS-REFERENCES 12
QQ-A-200/11Interchangeable
interchangeable cross-reference
interchangeable
AMS-QQ-A-200/11Interchangeable
interchangeable cross-reference
interchangeable
LS4028Interchangeable
interchangeable cross-reference
interchangeable
CVCPICInterchangeable
interchangeable cross-reference
interchangeable
177628Interchangeable
interchangeable cross-reference
interchangeable
AN6291-28Interchangeable
Same NIIN cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy LS-40-28?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LS-40-28?
LS-40-28 is a SUPPORT,STRUCTURAL COMPONENT,AIR.
What parts can replace LS-40-28?
There are 12 known substitutes for LS-40-28: QQ-A-200/11, AMS-QQ-A-200/11, LS4028 and 9 more. Substitute compatibility should be verified for your specific system.
What is the NSN for LS-40-28?
LS-40-28 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-186-1300. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LS-40-28

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026