PartsTable
Technical Data Sheet
PartsTable / MRO / LS-10
LS-10 ✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

CABLE ASSEMBLY,SPECIAL PURPOSE,E. Key specifications include material: COPPER ALLOY RACE INSERT, bore_shape: STRAIGHT, power_rating: 2.00 WATTS NORMAL, bore_diameter: 0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN, overall_depth: 6.750 INCHES NOMINAL IN, overall_width: 48.0 MILLIMETERS NOMINAL MM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-155-8888, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ LS-10
NSN: 3110-00-155-8888
FSC: 3110
CAGE: 43991 — FAG BEARINGS CORPORATION (USA)
SPECIFICATIONS
materialCOPPER ALLOY RACE INSERT
bore_shapeSTRAIGHT
power_rating2.00 WATTS NORMAL
bore_diameter0.6245 INCHES MINIMUM AND 0.6250 INCHES MAXIMUM IN
overall_depth6.750 INCHES NOMINAL IN
overall_width48.0 MILLIMETERS NOMINAL MM
load_directionRADIAL
overall_height22.4 MILLIMETERS NOMINAL MM
overall_length131.5 MILLIMETERS NOMINAL MM
surface_finishGROUND
hardness_rating60.0 ROCKWELL C NOMINAL INNER MEMBER
transducer_typeCONE
NSN3110-00-155-8888
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: LS-10 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL FIT-UP DESIGNATION: STANDARD
•
BORE SHAPE: STRAIGHT
•
MATERIAL: STEEL OVERALL
•
STYLE DESIGNATOR: NON-LOADING GROOVE, NON-SEPARABLE
•
DEPARTURE FROM CITED DESIGNATOR: AS MODIFIED BY OVERALL OUTSIDE DIAMETER
•
NONDEFINITIVE SPEC/STD DATA: 115 TYPE AND 00 GRADE
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
INTERNAL FIT-UP DESIGNATIONSTANDARD
BORE SHAPESTRAIGHT
OVERALL WIDTH0.6250 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
STYLE DESIGNATORNON-LOADING GROOVE, NON-SEPARABLE
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY OVERALL OUTSIDE DIAMETER
NONDEFINITIVE SPEC/STD DATA115 TYPE AND 00 GRADE
BORE SHAPESTRAIGHT
DEPARTURE FROM CITED DESIGNATORAS MODIFIED BY OVERALL OUTSIDE DIAMETER
SURFACE FINISHGROUND
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
89-515Interchangeable
interchangeable cross-reference
interchangeable
2591-6Interchangeable
interchangeable cross-reference
interchangeable
LS10Interchangeable
interchangeable cross-reference
interchangeable
2029027Interchangeable
interchangeable cross-reference
interchangeable
GGG-S-282Interchangeable
interchangeable cross-reference
interchangeable
GGG-S-282 TY1SZ2Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLED
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy LS-10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LS-10?
LS-10 is a CABLE ASSEMBLY,SPECIAL PURPOSE,E. It is classified as a MRO (MRO_GENERAL).
What parts can replace LS-10?
There are 14 known substitutes for LS-10: 89-515, 2591-6, LS10 and 11 more. Substitute compatibility should be verified for your specific system.
Is LS-10 still available?
LS-10 is currently cancelled.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LS-10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026