PartsTable
Technical Data Sheet
Download PDF

LR14 — LR14

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

LR14: LR14.

The LR14 is a the manufacturer industrial component. Key specifications include material: ZINC OVERALL, design_type: LOOP ENGAGING, hole_diameter: 0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN, overall_width: 1.870 INCHES NOMINAL IN, overall_height: 2.900 INCHES NOMINAL IN, overall_length: 3.590 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5340-00-489-4675, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ LR14
NSN: 5340-00-489-4675
NIINs: 004894675, 014731147, 016210297, 017149865
FSC: 5340 — Hardware, Commercial
CAGE: 06004 — STEWART-WARNER BASSICK CORP (USA)
SPECIFICATIONS
materialZINC OVERALL
design_typeLOOP ENGAGING
hole_diameter0.130 INCHES MINIMUM AND 0.135 INCHES MAXIMUM IN
hole_quantity4
overall_width1.870 INCHES NOMINAL IN
overall_height2.900 INCHES NOMINAL IN
overall_length3.590 INCHES NOMINAL IN
operation_methodLEVER HANDLE
style_designatorLEVEL
engaging_surface_width0.810 INCHES NOMINAL IN
end_item_identificationAEGIS WPN SYS, TICONDEROGA CLASS CG (47)
engaging_surface_thickness0.190 INCHES NOMINAL IN
NSN5340-00-489-4675
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: LR14 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
DESIGN TYPE: LOOP ENGAGING
•
ENGAGING SURFACE WIDTH: 0.810 INCHES NOMINAL IN
•
STYLE DESIGNATOR: LEVEL
•
ENGAGING SURFACE THICKNESS: 0.190 INCHES NOMINAL IN
•
MATERIAL: ZINC OVERALL
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT2.900 INCHES NOMINAL IN
DESIGN TYPELOOP ENGAGING
ENGAGING SURFACE WIDTH0.810 INCHES NOMINAL IN
STYLE DESIGNATORLEVEL
OVERALL LENGTH3.590 INCHES NOMINAL IN
OVERALL WIDTH1.870 INCHES NOMINAL IN
ENGAGING SURFACE THICKNESS0.190 INCHES NOMINAL IN
MATERIALZINC OVERALL
HOLE QUANTITY4
OPERATION METHODLEVER HANDLE
SUBSTITUTES & CROSS-REFERENCES 1
ZLA1072Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy LR14?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LR14?
LR14 is a LR14. It is classified as a MRO (MRO_GENERAL).
What parts can replace LR14?
There is 1 known substitute for LR14: ZLA1072. Substitute compatibility should be verified for your specific system.
What is the NSN for LR14?
LR14 is cataloged in the U.S. Government catalog under NSN 5340-00-489-4675. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LR14

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.