LP9A1B106J — CAPACITOR,FIXED,METALLIZED,PAPER

✓ Government record, cited

— · MRO · MRO_GENERAL

PRODUCT OVERVIEW

LP9A1B106J: CAPACITOR,FIXED,METALLIZED,PAPER.

CAPACITOR,FIXED,METALLIZED,PAPER. Key specifications include body_style: W/O MTG FACILITIES, AXIAL TERMINALS, body_length: 1.781 INCHES MINIMUM AND 1.843 INCHES MAXIMUM IN, body_diameter: 0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN, terminal_length: 1.454 INCHES MINIMUM AND 2.454 INCHES MAXIMUM IN, features_provided: HERMETICALLY SEALED CASE, terminal_diameter: 0.032 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5910-00-451-5688, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

MRO→ MRO_GENERAL→ LP9A1B106J

NSN: 5910-00-451-5688
NIINs: 004515688, 012268310
FSC: 5910 — Capacitors
CAGE: 01884 — EXXELIA USA, INC. (USA)

SPECIFICATIONS

body_style	W/O MTG FACILITIES, AXIAL TERMINALS
body_length	1.781 INCHES MINIMUM AND 1.843 INCHES MAXIMUM IN
body_diameter	0.730 INCHES MINIMUM AND 0.770 INCHES MAXIMUM IN
terminal_length	1.454 INCHES MINIMUM AND 2.454 INCHES MAXIMUM IN
features_provided	HERMETICALLY SEALED CASE
terminal_diameter	0.032 INCHES NOMINAL IN
reliability_indicator	NOT ESTABLISHED
end_item_identification	SH-60B HELICOPTER LAMPS MARK 3
case_insulation_material	PLASTIC
nonderated_operating_temp	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
terminal_surface_treatment	SOLDER
terminal_type_and_quantity	2 UNINSULATED WIRE LEAD
NSN	5910-00-451-5688

COMPONENT DIAGRAM

KEY FEATURES

•

BODY DIAMETER: 0.770 INCHES NOMINAL IN

•

BODY STYLE: W/O MTG FACILITIES, AXIAL TERMINALS

•

TOLERANCE RANGE PER SECTION: -5.00 TO 5.00 PERCENT SINGLE SECTION

•

NONDERATED OPERATING TEMP: -55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC

•

TERMINAL SURFACE TREATMENT: SOLDER

•

TERMINAL LENGTH: 1.625 INCHES MINIMUM IN

•

FEATURES PROVIDED: HERMETICALLY SEALED CASE

•

NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION: 100.0 DC SINGLE SECTION

TYPICAL APPLICATIONS

RAID cache protection during power loss events
Write-back cache enablement for storage controllers
Enterprise server data integrity assurance
Hot-swap battery/capacitor replacement in production

TECHNICAL CHARACTERISTICS

BODY DIAMETER	0.770 INCHES NOMINAL IN
BODY STYLE	W/O MTG FACILITIES, AXIAL TERMINALS
TOLERANCE RANGE PER SECTION	-5.00 TO 5.00 PERCENT SINGLE SECTION
NONDERATED OPERATING TEMP	-55.0 CELSIUS MINIMUM AND 125.0 CELSIUS MAXIMUM DEGC
TERMINAL SURFACE TREATMENT	SOLDER
TERMINAL LENGTH	1.625 INCHES MINIMUM IN
FEATURES PROVIDED	HERMETICALLY SEALED CASE
NONDERATED CONTINUOUS VOLTAGE RATING AND TYPE PER SECTION	100.0 DC SINGLE SECTION
SCHEMATIC DIAGRAM DESIGNATOR	NO COMMON OR GROUNDED ELECTRODE(S)
CASE INSULATION MATERIAL	PLASTIC

SUBSTITUTES & CROSS-REFERENCES 1

301888-2Reference document

Same NSN cross-reference

Reference document — Secondary reference

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required

Ready to buy LP9A1B106J?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is LP9A1B106J?

LP9A1B106J is a CAPACITOR,FIXED,METALLIZED,PAPER. It is classified as a MRO (MRO_GENERAL).

What parts can replace LP9A1B106J?

There is 1 known substitute for LP9A1B106J: 301888-2. Substitute compatibility should be verified for your specific system.

What is the NSN for LP9A1B106J?

LP9A1B106J is cataloged in the U.S. Government catalog under NSN 5910-00-451-5688. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

LP9A1B106J — CAPACITOR,FIXED,METALLIZED,PAPER

Request a Quote — LP9A1B106J