PartsTable
Technical Data Sheet
Download PDF

LP57U04J8M — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

LP57U04J8M: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OVERALL, head_style: FLAT CHAMFER, head_height: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN, thread_class: 3A A, head_diameter: 0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN, thread_length: 0.500 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-975-0967, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LP57U04J8M
NSN: 5305-00-975-0967
FSC: 5305 — Screws
CAGE: 03038 — LONG-LOK, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OVERALL
head_styleFLAT CHAMFER
head_height0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
thread_class3A A
head_diameter0.303 INCHES MINIMUM AND 0.312 INCHES MAXIMUM IN
thread_length0.500 INCHES MINIMUM IN
fastener_length0.500 INCHES NOMINAL IN
locking_featurePELLET OR STRIP THREADS
thread_directionRIGHT-HAND
surface_treatmentPASSIVATE OVERALL
width_across_flats0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
internal_drive_styleHEXAGON
NSN5305-00-975-0967
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: LP57U04J8M · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
•
HEAD HEIGHT: 0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.500 INCHES NOMINAL IN
•
THREAD LENGTH: 0.500 INCHES MINIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: QQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FLAT CHAMFER
•
THREAD DIRECTION: RIGHT-HAND
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.156 INCHES MINIMUM AND 0.159 INCHES MAXIMUM IN
HEAD HEIGHT0.185 INCHES MINIMUM AND 0.190 INCHES MAXIMUM IN
FASTENER LENGTH0.500 INCHES NOMINAL IN
THREAD LENGTH0.500 INCHES MINIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONQQ-S-763 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFLAT CHAMFER
THREAD DIRECTIONRIGHT-HAND
LOCKING FEATUREPELLET OR STRIP THREADS
SURFACE TREATMENTPASSIVATE OVERALL
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 6
2462438PC47Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
H669161008Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
1486137-PC79Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
M60CR1024-8Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
M60CR1024-8EReference document
Same NSN cross-reference
Reference document — Design control — primary reference
1486137-79Reference document
Same NSN cross-reference
Reference document — Vendor item drawing reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy LP57U04J8M?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LP57U04J8M?
LP57U04J8M is a SCREW,CAP,SOCKET HEAD.
What parts can replace LP57U04J8M?
There are 6 known substitutes for LP57U04J8M: 2462438PC47, H669161008, 1486137-PC79 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for LP57U04J8M?
LP57U04J8M is cataloged in the U.S. Government catalog under NSN 5305-00-975-0967. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LP57U04J8M