PartsTable
Technical Data Sheet
Download PDF

LP57G40P3 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

LP57G40P3: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL COMP 302 OVERALL, head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.225 INCHES NOMINAL IN, thread_length: 0.140 INCHES MINIMUM IN, fastener_length: 0.188 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-082-6755, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LP57G40P3
NSN: 5305-00-082-6755
FSC: 5305 — Screws
CAGE: 03038 — LONG-LOK, LLC (USA)
SPECIFICATIONS
materialSTEEL COMP 302 OVERALL
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.225 INCHES NOMINAL IN
thread_length0.140 INCHES MINIMUM IN
fastener_length0.188 INCHES NOMINAL IN
locking_featureSTRIP THREADS
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
surface_treatmentPASSIVATE OVERALL
internal_drive_styleSLOT
nominal_thread_diameter0.112 INCHES IN
NSN5305-00-082-6755
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: LP57G40P3 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 0.188 INCHES NOMINAL IN
•
THREAD LENGTH: 0.140 INCHES MINIMUM IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
LOCKING FEATURE: STRIP THREADS
•
SURFACE TREATMENT: PASSIVATE OVERALL
TECHNICAL CHARACTERISTICS
FASTENER LENGTH0.188 INCHES NOMINAL IN
THREAD LENGTH0.140 INCHES MINIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-7720 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
LOCKING FEATURESTRIP THREADS
SURFACE TREATMENTPASSIVATE OVERALL
MINIMUM TENSILE STRENGTH75000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLESLOT
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-001-5016 5305-00-001-9160 5305-00-001-9629 5305-00-001-9742 5305-00-001-9768 5305-00-003-4306 5305-00-003-6694 5305-00-003-6753
SUBSTITUTES & CROSS-REFERENCES 1
860186-4203Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy LP57G40P3?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LP57G40P3?
LP57G40P3 is a SCREW,CAP,SOCKET HEAD.
What parts can replace LP57G40P3?
There is 1 known substitute for LP57G40P3: 860186-4203. Substitute compatibility should be verified for your specific system.
What is the NSN for LP57G40P3?
LP57G40P3 is cataloged in the U.S. Government catalog under NSN 5305-00-082-6755. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LP57G40P3