PartsTable
Technical Data Sheet
PartsTable / COMPONENT / LP54J62P8
LP54J62P8 ✓ Verified by PartsTable
— · BOLT SCREW
WHAT YOU NEED TO KNOW
Grade/class stamped on head determines strength Metric and imperial threads look similar — measure pitch
Verify thread pitch — metric != imperial
PRODUCT OVERVIEW

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.268 INCHES NOMINAL IN, thread_length: 0.375 INCHES MINIMUM IN, fastener_length: 0.500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-845-9126, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LP54J62P8
NSN: 5305-00-845-9126
FSC: 5305
CAGE: 03038 — LONG-LOK, LLC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.268 INCHES NOMINAL IN
thread_length0.375 INCHES MINIMUM IN
fastener_length0.500 INCHES NOMINAL IN
locking_featureSTRIP THREADS
thread_directionRIGHT-HAND
countersink_angle82.0 DEGREES NOMINAL
surface_treatmentPASSIVATE OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.138 INCHES IN
NSN5305-00-845-9126
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: LP54J62P8 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
THREAD LENGTH: 0.375 INCHES MINIMUM IN
•
MINIMUM TENSILE STRENGTH: 75000 POUNDS PER SQUARE INCH LBS
•
MATERIAL: STEEL CORROSION RESISTING OVERALL
•
COUNTERSINK ANGLE: 82.0 DEGREES NOMINAL
•
LOCKING FEATURE: STRIP THREADS
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
THREAD CLASS: 2A A
•
THREAD SERIES DESIGNATOR: UNIFIED NATIONAL COARSE (UNC)
TECHNICAL CHARACTERISTICS (FLIS)
THREAD LENGTH0.375 INCHES MINIMUM IN
MINIMUM TENSILE STRENGTH75000 POUNDS PER SQUARE INCH LBS
MATERIALSTEEL CORROSION RESISTING OVERALL
COUNTERSINK ANGLE82.0 DEGREES NOMINAL
LOCKING FEATURESTRIP THREADS
SURFACE TREATMENTPASSIVATE OVERALL
THREAD CLASS2A A
THREAD SERIES DESIGNATORUNIFIED NATIONAL COARSE (UNC)
THREAD QUANTITY PER INCH32
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
10121302Interchangeable
interchangeable cross-reference
interchangeable
W1102-012Interchangeable
interchangeable cross-reference
interchangeable
65-043154Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy LP54J62P8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LP54J62P8?
LP54J62P8 is a SCREW,CAP,SOCKET HEAD.
What parts can replace LP54J62P8?
There are 3 known substitutes for LP54J62P8: 10121302, W1102-012, 65-043154. Substitute compatibility should be verified for your specific system.
What is the NSN for LP54J62P8?
LP54J62P8 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5305-00-845-9126. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LP54J62P8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026