PartsTable
Technical Data Sheet
Download PDF

LP52-0245-30A — O-RING

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

LP52-0245-30A: O-RING.

The O-RING is a the manufacturer industrial component. Key specifications include material: RUBBER, temp_rating: -54.0 CELSIUS AND 135.0 CELSIUS DEGC, center_hole_diameter: 24.250 MILLIMETERS MINIMUM AND 24.750 MILLIMETERS MAXIMUM MM, cross-sectional_height: 2.900 MILLIMETERS MINIMUM AND 3.100 MILLIMETERS MAXIMUM MM, end_item_identification: LW155 HOWITZER. This part is cataloged in the U.S.

Government catalog under NSN 5331-01-524-9788, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LP52-0245-30A
NSN: 5331-01-524-9788
FSC: 5331 — O-ring
CAGE: K4244 — BAE SYSTEMS GCS INTERNATIONAL LTD (GBR)
SPECIFICATIONS
materialRUBBER
temp_rating-54.0 CELSIUS AND 135.0 CELSIUS DEGC
center_hole_diameter24.250 MILLIMETERS MINIMUM AND 24.750 MILLIMETERS MAXIMUM MM
cross-sectional_height2.900 MILLIMETERS MINIMUM AND 3.100 MILLIMETERS MAXIMUM MM
end_item_identificationLW155 HOWITZER
NSN5331-01-524-9788
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: LP52-0245-30A MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
TEMP RATING: -54.0 CELSIUS AND 135.0 CELSIUS DEGC
•
CROSS-SECTIONAL HEIGHT: 2.900 MILLIMETERS MINIMUM AND 3.100 MILLIMETERS MAXIMUM MM
•
CENTER HOLE DIAMETER: 24.250 MILLIMETERS MINIMUM AND 24.750 MILLIMETERS MAXIMUM MM
•
MATERIAL: RUBBER
TECHNICAL CHARACTERISTICS
TEMP RATING-54.0 CELSIUS AND 135.0 CELSIUS DEGC
CROSS-SECTIONAL HEIGHT2.900 MILLIMETERS MINIMUM AND 3.100 MILLIMETERS MAXIMUM MM
CENTER HOLE DIAMETER24.250 MILLIMETERS MINIMUM AND 24.750 MILLIMETERS MAXIMUM MM
END ITEM IDENTIFICATIONLW155 HOWITZER
MATERIALRUBBER
OTHER ITEMS IN FSC 5331 — O-ring
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5331-00-001-1971 5331-00-001-1979 5331-00-001-3904 5331-00-001-3905 5331-00-001-3906 5331-00-001-3908 5331-00-001-3923 5331-00-001-3924
SUBSTITUTES & CROSS-REFERENCES 2
AS06-1004Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
13049738Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
No demilitarization required
Ready to buy LP52-0245-30A?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LP52-0245-30A?
LP52-0245-30A is a O-RING.
What parts can replace LP52-0245-30A?
There are 2 known substitutes for LP52-0245-30A: AS06-1004, 13049738. Substitute compatibility should be verified for your specific system.
What is the NSN for LP52-0245-30A?
LP52-0245-30A is cataloged in the U.S. Government catalog under NSN 5331-01-524-9788. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LP52-0245-30A