PartsTable
Technical Data Sheet
Download PDF

LP507C428-18 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

LP507C428-18: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING OVERALL, head_style: FLAT COUNTERSUNK, thread_class: 2A A, head_diameter: 0.462 INCHES MINIMUM AND 0.547 INCHES MAXIMUM IN, thread_length: 1.125 INCHES MAXIMUM IN, fastener_length: 1.125 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-901-5090, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LP507C428-18
NSN: 5305-00-901-5090
FSC: 5305 — Screws
CAGE: 03038 — LONG-LOK, LLC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
head_styleFLAT COUNTERSUNK
thread_class2A A
head_diameter0.462 INCHES MINIMUM AND 0.547 INCHES MAXIMUM IN
thread_length1.125 INCHES MAXIMUM IN
fastener_length1.125 INCHES NOMINAL IN
locking_featureSTRIP THREADS
thread_directionRIGHT-HAND
countersink_angle100.0 DEGREES NOMINAL
surface_treatmentPASSIVATE OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.250 INCHES IN
NSN5305-00-901-5090
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: LP507C428-18 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENER LENGTH: 1.125 INCHES NOMINAL IN
•
THREAD LENGTH: 1.125 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.250 INCHES IN
•
HEAD STYLE: FLAT COUNTERSUNK
•
THREAD DIRECTION: RIGHT-HAND
•
LOCKING FEATURE: STRIP THREADS
•
SURFACE TREATMENT: PASSIVATE OVERALL
•
INTERNAL DRIVE STYLE: CROSS RECESS TYPE 1
TECHNICAL CHARACTERISTICS
FASTENER LENGTH1.125 INCHES NOMINAL IN
THREAD LENGTH1.125 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.250 INCHES IN
HEAD STYLEFLAT COUNTERSUNK
THREAD DIRECTIONRIGHT-HAND
LOCKING FEATURESTRIP THREADS
SURFACE TREATMENTPASSIVATE OVERALL
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
COUNTERSINK ANGLE100.0 DEGREES NOMINAL
THREAD CLASS2A A
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 1
60000550Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Semi-active item — no replacement plannedNo demilitarization required
Ready to buy LP507C428-18?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LP507C428-18?
LP507C428-18 is a SCREW,CAP,SOCKET HEAD.
What parts can replace LP507C428-18?
There is 1 known substitute for LP507C428-18: 60000550. Substitute compatibility should be verified for your specific system.
What is the NSN for LP507C428-18?
LP507C428-18 is cataloged in the U.S. Government catalog under NSN 5305-00-901-5090. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LP507C428-18