PartsTable
Technical Data Sheet
Download PDF

LP26XC02J5 — SETSCREW

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

LP26XC02J5: SETSCREW.

The SETSCREW is a the manufacturer industrial component. Key specifications include head_style: HEADLESS (SETSCREW), head_height: 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN, point_style: FLAT, thread_class: 2A A, head_diameter: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, fastener_length: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-01-048-0519, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LP26XC02J5
NSN: 5305-01-048-0519
FSC: 5305 — Screws
CAGE: 03038 — LONG-LOK, LLC (USA)
SPECIFICATIONS
head_styleHEADLESS (SETSCREW)
head_height0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
point_styleFLAT
thread_class2A A
head_diameter0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
fastener_length0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
thread_directionRIGHT-HAND
internal_drive_styleHEXAGON
nominal_thread_diameter0.190 INCHES IN
thread_quantity_per_inch32
thread_series_designatorUNF
NSN5305-01-048-0519
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: LP26XC02J5 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: HEADLESS (SETSCREW)
•
THREAD DIRECTION: RIGHT-HAND
•
POINT STYLE: FLAT
•
INTERNAL DRIVE STYLE: HEXAGON
•
THREAD CLASS: 2A A
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.080 INCHES MINIMUM AND 0.100 INCHES MAXIMUM IN
FASTENER LENGTH0.302 INCHES MINIMUM AND 0.322 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEHEADLESS (SETSCREW)
THREAD DIRECTIONRIGHT-HAND
POINT STYLEFLAT
INTERNAL DRIVE STYLEHEXAGON
THREAD CLASS2A A
THREAD QUANTITY PER INCH32
THREAD SERIES DESIGNATORUNF
SUBSTITUTES & CROSS-REFERENCES 1
41598Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy LP26XC02J5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LP26XC02J5?
LP26XC02J5 is a SETSCREW.
What parts can replace LP26XC02J5?
There is 1 known substitute for LP26XC02J5: 41598. Substitute compatibility should be verified for your specific system.
What is the NSN for LP26XC02J5?
LP26XC02J5 is cataloged in the U.S. Government catalog under NSN 5305-01-048-0519. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LP26XC02J5

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.