PartsTable
Technical Data Sheet
Download PDF

LP24584-11 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

LP24584-11: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: BINDING, head_height: 0.075 INCHES NOMINAL IN, thread_class: 2A A, head_diameter: 0.212 INCHES NOMINAL IN, thread_length: 0.157 INCHES MINIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-053-8745, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LP24584-11
NSN: 5305-00-053-8745
FSC: 5305 — Screws
CAGE: 03038 — LONG-LOK, LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleBINDING
head_height0.075 INCHES NOMINAL IN
thread_class2A A
head_diameter0.212 INCHES NOMINAL IN
thread_length0.157 INCHES MINIMUM IN
fastener_length0.219 INCHES NOMINAL IN
locking_featureSTRIP THREADS
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
internal_drive_styleCROSS RECESS TYPE 1
nominal_thread_diameter0.112 INCHES IN
NSN5305-00-053-8745
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: LP24584-11 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.075 INCHES NOMINAL IN
•
FASTENER LENGTH: 0.219 INCHES NOMINAL IN
•
THREAD LENGTH: 0.157 INCHES MINIMUM IN
•
NOMINAL THREAD DIAMETER: 0.112 INCHES IN
•
HEAD STYLE: BINDING
•
THREAD DIRECTION: RIGHT-HAND
•
LOCKING FEATURE: STRIP THREADS
•
SURFACE TREATMENT: CADMIUM OVERALL
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.075 INCHES NOMINAL IN
FASTENER LENGTH0.219 INCHES NOMINAL IN
THREAD LENGTH0.157 INCHES MINIMUM IN
NOMINAL THREAD DIAMETER0.112 INCHES IN
HEAD STYLEBINDING
THREAD DIRECTIONRIGHT-HAND
LOCKING FEATURESTRIP THREADS
SURFACE TREATMENTCADMIUM OVERALL
MINIMUM TENSILE STRENGTH55000 POUNDS PER SQUARE INCH LBS
INTERNAL DRIVE STYLECROSS RECESS TYPE 1
OTHER ITEMS IN FSC 5305 — Screws
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5305-00-000-0094 5305-00-000-1397 5305-00-000-2625 5305-00-000-3669 5305-00-000-3830 5305-00-000-3831
SUBSTITUTES & CROSS-REFERENCES 3
7735230-11Reference document
Same NSN cross-reference
Reference document — Secondary reference
113B2527Reference document
Same NSN cross-reference
Reference document — Secondary reference
113B2527-1Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy LP24584-11?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LP24584-11?
LP24584-11 is a SCREW,CAP,SOCKET HEAD.
What parts can replace LP24584-11?
There are 3 known substitutes for LP24584-11: 7735230-11, 113B2527, 113B2527-1. Substitute compatibility should be verified for your specific system.
What is the NSN for LP24584-11?
LP24584-11 is cataloged in the U.S. Government catalog under NSN 5305-00-053-8745. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LP24584-11