PartsTable
Technical Data Sheet
Download PDF

LP22N02S4 — SCREW,CAP,SOCKET HEAD

✓ Government record, cited
— · BOLT SCREW
PRODUCT OVERVIEW

LP22N02S4: SCREW,CAP,SOCKET HEAD.

The SCREW,CAP,SOCKET HEAD is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, head_style: FILLISTER, head_height: 0.118 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, thread_class: 2A A, head_diameter: 0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN, thread_length: 0.188 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5305-00-467-0396, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LP22N02S4
NSN: 5305-00-467-0396
FSC: 5305 — Screws
CAGE: 03038 — LONG-LOK, LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
head_styleFILLISTER
head_height0.118 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
thread_class2A A
head_diameter0.292 INCHES MINIMUM AND 0.313 INCHES MAXIMUM IN
thread_length0.188 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
fastener_length0.250 INCHES NOMINAL IN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
internal_drive_styleSLOT
nominal_thread_diameter0.190 INCHES IN
thread_quantity_per_inch32
NSN5305-00-467-0396
COMPONENT DIAGRAM
BOLT / SCREW — THREAD VERIFICATION REQUIRED Hex HEAD LENGTH: — THREAD: — × — MATERIAL: — PN: LP22N02S4 · OEM ⚠ VERIFY BEFORE ORDERING Verify thread pitch before ordering — metric (M8×1.25) ≠ imperial (5/16-18). Wrong thread = wrong part. Grade/class stamped on bolt head determines tensile strength ✓ BROKER TIP Grade/class stamped on head determines tensile strength. Grade 8 > Grade 5 > Grade 2. Always confirm head marking matches specification requirement PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEAD HEIGHT: 0.118 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
FASTENER LENGTH: 0.250 INCHES NOMINAL IN
•
THREAD LENGTH: 0.188 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
•
NOMINAL THREAD DIAMETER: 0.190 INCHES IN
•
HEAD STYLE: FILLISTER
•
THREAD DIRECTION: RIGHT-HAND
•
SURFACE TREATMENT: CADMIUM OVERALL
•
INTERNAL DRIVE STYLE: SLOT
TECHNICAL CHARACTERISTICS
HEAD HEIGHT0.118 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
FASTENER LENGTH0.250 INCHES NOMINAL IN
THREAD LENGTH0.188 INCHES MINIMUM AND 0.250 INCHES MAXIMUM IN
NOMINAL THREAD DIAMETER0.190 INCHES IN
HEAD STYLEFILLISTER
THREAD DIRECTIONRIGHT-HAND
SURFACE TREATMENTCADMIUM OVERALL
INTERNAL DRIVE STYLESLOT
THREAD CLASS2A A
THREAD QUANTITY PER INCH32
SUBSTITUTES & CROSS-REFERENCES 1
X10835Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy LP22N02S4?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LP22N02S4?
LP22N02S4 is a SCREW,CAP,SOCKET HEAD.
What parts can replace LP22N02S4?
There is 1 known substitute for LP22N02S4: X10835. Substitute compatibility should be verified for your specific system.
What is the NSN for LP22N02S4?
LP22N02S4 is cataloged in the U.S. Government catalog under NSN 5305-00-467-0396. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LP22N02S4

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.