PartsTable
Technical Data Sheet
PartsTable / MRO / LP-8

LP-8 — Technical Data Sheet

✓ Verified by PartsTable
— · MRO · MRO_GENERAL
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,LINEAR MOTION is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, scale_name: OUNCES SCALE AND GRAMS SCALE, scale_range: +0.0 TO 8.0 OUNCES OZ, physical_form: LIQUID, surface_finish: GROUND, basic_ingredient: POLYSULFIDE. This part is cataloged in the Federal Logistics Information System under NSN 3110-00-540-8067, indicating validated use in U.S.

government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ LP-8
NSN: 3110-00-540-8067
FSC: 3110
CAGE: 70854 — SCHAEFFLER AEROSPACE USA CORP DIV SCHAEFFLER AEROSPACE USA CORPORATION (USA)
SPECIFICATIONS
materialSTEEL OVERALL
scale_nameOUNCES SCALE AND GRAMS SCALE
scale_range+0.0 TO 8.0 OUNCES OZ
physical_formLIQUID
scale_quantity2
surface_finishGROUND
basic_ingredientPOLYSULFIDE
outside_diameter0.8746 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
special_featuresTORQUE CONVERTER,NONVEHICULAR
unit_package_quantity1
working_bore_diameter0.4997 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
unpackaged_unit_weightERR-060
NSN3110-00-540-8067
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: LP-8 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
MATERIAL: STEEL OVERALL
•
WORKING BORE DIAMETER: 0.4997 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
•
OUTSIDE DIAMETER: 0.8746 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
SURFACE FINISHGROUND
MATERIALSTEEL OVERALL
WORKING BORE DIAMETER0.4997 INCHES MINIMUM AND 0.5000 INCHES MAXIMUM IN
OUTSIDE DIAMETER0.8746 INCHES MINIMUM AND 0.8750 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 16
07012InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
11290148InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
14110InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
14121InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
23135InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
C85-15InterchangeableGOVERNMENT REGISTRY
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusCANCELLEDGOVERNMENT REGISTRY
Availability—
RoHS CompliantEAR99Not HAZMAT
Ready to buy LP-8?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LP-8?
LP-8 is a BEARING,BALL,LINEAR MOTION. It is classified as a MRO (MRO_GENERAL).
What parts can replace LP-8?
There are 16 known substitutes for LP-8: 07012, 11290148, 14110 and 13 more. Substitute compatibility should be verified for your specific system.
Is LP-8 still available?
LP-8 is currently cancelled.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LP-8

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: September 2026