PartsTable
Technical Data Sheet
Download PDF

LO3115 — RESISTOR,FIXED,FILM

✓ Government record, cited
— · MRO · MRO_GENERAL
PRODUCT OVERVIEW

LO3115: RESISTOR,FIXED,FILM.

The RESISTOR,FIXED,FILM is a the manufacturer industrial component. Key specifications include body_width: 0.326 INCHES NOMINAL IN, body_height: 0.105 INCHES NOMINAL IN, body_length: 0.302 INCHES NOMINAL IN, terminal_type: WIRE LEAD, inclosure_type: ENCAPSULATED, terminal_length: 1.375 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5905-01-120-3783, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
MRO→ MRO_GENERAL→ LO3115
NSN: 5905-01-120-3783
FSC: 5905 — Resistor
CAGE: 16236 — DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) (USA)
SPECIFICATIONS
body_width0.326 INCHES NOMINAL IN
body_height0.105 INCHES NOMINAL IN
body_length0.302 INCHES NOMINAL IN
terminal_typeWIRE LEAD
inclosure_typeENCAPSULATED
terminal_length1.375 INCHES NOMINAL IN
special_featuresITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO3115
style_designatorTERMINALS ONE EDGE
electrical_resistance30.100 KILOHMS
reliability_indicatorNOT ESTABLISHED
criticality_code_justificationZZZY
resistance_tolerance_in_percent-0.100 TO 0.100
NSN5905-01-120-3783
COMPONENT DIAGRAM
COMPONENT MAIN IC EDGE CONNECTOR No detailed specs available RESISTOR,FIXED,FILM TITLE COMPONENT PN LO3115 MFR RESISTOR,FIXED,FILM
KEY FEATURES
•
RESISTANCE TOLERANCE IN PERCENT: -0.100 TO 0.100
•
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS: -5.0 TO 5.0
•
ELECTRICAL RESISTANCE: 30.100 KILOHMS
•
INCLOSURE TYPE: ENCAPSULATED
•
TERMINAL TYPE: WIRE LEAD
•
TERMINAL LENGTH: 1.375 INCHES NOMINAL IN
•
BODY WIDTH: 0.326 INCHES NOMINAL IN
•
BODY HEIGHT: 0.105 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
RESISTANCE TOLERANCE IN PERCENT-0.100 TO 0.100
TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS-5.0 TO 5.0
ELECTRICAL RESISTANCE30.100 KILOHMS
INCLOSURE TYPEENCAPSULATED
TERMINAL TYPEWIRE LEAD
TERMINAL LENGTH1.375 INCHES NOMINAL IN
BODY WIDTH0.326 INCHES NOMINAL IN
BODY HEIGHT0.105 INCHES NOMINAL IN
CRITICALITY CODE JUSTIFICATIONZZZY
TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS-55.0 TO 175.0
OTHER ITEMS IN FSC 5905 — Resistor
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5905-00-000-0136 5905-00-000-0488 5905-00-000-8809 5905-00-000-8833 5905-00-000-9526 5905-00-001-1342 5905-00-001-1573 5905-00-001-2059
SUBSTITUTES & CROSS-REFERENCES 3
S10C 18K00 BReference document
Same NSN cross-reference
Reference document — Secondary reference
KRD310HReference document
Same NSN cross-reference
Reference document — Design control — primary reference
S102C18K000PORM0.1PCTReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy LO3115?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LO3115?
LO3115 is a RESISTOR,FIXED,FILM. It is classified as a MRO (MRO_GENERAL).
What parts can replace LO3115?
There are 3 known substitutes for LO3115: S10C 18K00 B, KRD310H, S102C18K000PORM0.1PCT. Substitute compatibility should be verified for your specific system.
What is the NSN for LO3115?
LO3115 is cataloged in the U.S. Government catalog under NSN 5905-01-120-3783. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LO3115