PartsTable
Technical Data Sheet
Download PDF

LO1612 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

LO1612: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER CHLOROPRENE CLASS CR OVERALL, hole_diameter: 0.310 INCHES NOMINAL ALL HOLES IN, overall_width: 4.690 INCHES NOMINAL IN, overall_length: 4.690 INCHES NOMINAL IN, hardness_rating: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL, special_features: ITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO-012676363..

This part is cataloged in the U.S. Government catalog under NSN 5330-01-267-6363, indicating validated use in U.S. government and defense logistics supply chains.

Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LO1612
NSN: 5330-01-267-6363
FSC: 5330 — Packing and Gasket Materials
CAGE: 16236 — DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) (USA)
SPECIFICATIONS
materialRUBBER CHLOROPRENE CLASS CR OVERALL
hole_diameter0.310 INCHES NOMINAL ALL HOLES IN
overall_width4.690 INCHES NOMINAL IN
overall_length4.690 INCHES NOMINAL IN
hardness_rating45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
special_featuresITEM MUST COMPLY WITH REQUIREMENTS OF DEFENSE SUPPLY CENTER COLUMBUS PRODUCTION STANDARD NO. LO-012676363.
style_designatorNON-CIRCULAR
aperture_diameter4.060 INCHES NOMINAL IN
bolt_hole_quantity4
outside_corner_radius0.220 INCHES NOMINAL IN
special_test_featuresSPECIAL QUALITY CONTROL TESTING
cross-sectional_thickness0.062 INCHES NOMINAL IN
NSN5330-01-267-6363
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: LO1612 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.062 INCHES NOMINAL IN
•
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
•
HARDNESS RATING: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
•
CRITICALITY CODE JUSTIFICATION: ZZZY
•
STYLE DESIGNATOR: NON-CIRCULAR
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-G-1149,TYPE 1,CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.062 INCHES NOMINAL IN
SPECIAL TEST FEATURESSPECIAL QUALITY CONTROL TESTING
HARDNESS RATING45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
CRITICALITY CODE JUSTIFICATIONZZZY
STYLE DESIGNATORNON-CIRCULAR
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-G-1149,TYPE 1,CLASS 1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH4.690 INCHES NOMINAL IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
OVERALL WIDTH4.690 INCHES NOMINAL IN
APERTURE DIAMETER4.060 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 4
PO012676363Reference document
Same NSN cross-reference
Reference document — Secondary reference
LL-HX5-4999Reference document
Same NSN cross-reference
Reference document — Secondary reference
LO-012676363Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
124268-2Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Shelf-life managedAcquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy LO1612?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LO1612?
LO1612 is a GASKET.
What parts can replace LO1612?
There are 4 known substitutes for LO1612: PO012676363, LL-HX5-4999, LO-012676363 and 1 more. Substitute compatibility should be verified for your specific system.
What is the NSN for LO1612?
LO1612 is cataloged in the U.S. Government catalog under NSN 5330-01-267-6363. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LO1612