PartsTable
Technical Data Sheet
PartsTable / COMPONENT / LO-001697966
LO-001697966 ✓ Verified by PartsTable
— · TAPERED BEARING
WHAT YOU NEED TO KNOW
Cup and cone sold separately — confirm both needed Timken series numbers indicate dimensions
Cup and cone NOT sold as set — verify order
PRODUCT OVERVIEW

The BEARING,BALL,ANNULAR is a the manufacturer industrial component. Key specifications include material: STEEL COMP E52100 OUTER RING, bore_shape: STRAIGHT, bore_diameter: 10.00 MILLIMETERS NOMINAL MM, overall_width: 9.0 MILLIMETERS NOMINAL MM, load_direction: RADIAL, surface_finish: GROUND. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-169-7966, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LO-001697966
NSN: 3110-00-169-7966
FSC: 3110
CAGE: 16236 — DLA LAND AND MARITIME DBA ENGINEERING AND TECHNICAL SUPPORT DIV DOCUMENT STANDARDIZATION DIVISION (VENDOR ITEM DRAWINGS) (USA)
SPECIFICATIONS
materialSTEEL COMP E52100 OUTER RING
bore_shapeSTRAIGHT
bore_diameter10.00 MILLIMETERS NOMINAL MM
overall_width9.0 MILLIMETERS NOMINAL MM
seal_quantity2
load_directionRADIAL
surface_finishGROUND
style_designatorNON-LOADING GROOVE, NON-SEPARABLE
bearing_seal_typeCONTACT
lubrication_materialGREASE
special_test_featuresSPECIAL QUALITY CONTROL TESTING
overall_outside_diameter30.00 MILLIMETERS NOMINAL MM
NSN3110-00-169-7966
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: LO-001697966 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SEAL QUANTITY: 2
•
BORE SHAPE: STRAIGHT
•
SURFACE FINISH: GROUND
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
•
LOAD DIRECTION: RADIAL
•
SPECIAL TEST FEATURES: SPECIAL QUALITY CONTROL TESTING
TECHNICAL CHARACTERISTICS (FLIS)
SEAL QUANTITY2
BORE SHAPESTRAIGHT
SURFACE FINISHGROUND
BORE SHAPESTRAIGHT
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OUTER RING
OVERALL WIDTH9.0 MILLIMETERS NOMINAL MM
LOAD DIRECTIONRADIAL
SPECIAL TEST FEATURESSPECIAL QUALITY CONTROL TESTING
INTERNAL FIT-UP DESIGNATIONSTANDARD
RETAINER FABRICATION METHODPRESSED
VERIFIED SUBSTITUTES & CROSS-REFERENCES 3
50673Interchangeable
interchangeable cross-reference
interchangeable
6200-2RSTAInterchangeable
interchangeable cross-reference
interchangeable
E1880Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy LO-001697966?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LO-001697966?
LO-001697966 is a BEARING,BALL,ANNULAR.
What parts can replace LO-001697966?
There are 3 known substitutes for LO-001697966: 50673, 6200-2RSTA, E1880. Substitute compatibility should be verified for your specific system.
What is the NSN for LO-001697966?
LO-001697966 is cataloged in the Federal Logistics Information System (FLIS) under NSN 3110-00-169-7966. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LO-001697966

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026