PartsTable
Technical Data Sheet
Download PDF

LMX7-9 — CONNECTOR,RECEPTACLE,ELECTRICAL

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

LMX7-9: CONNECTOR,RECEPTACLE,ELECTRICAL.

CONNECTOR,RECEPTACLE,ELECTRICAL. Key specifications include material: STEEL OVERALL, alignment_type: RIGID, overall_height: 0.6250 INCHES NOMINAL IN, surface_finish: GROUND, special_features: RETAINERLESS TYPE, style_designator: GROOVED RACE SURFACE, BANDED OD. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-100-8525, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LMX7-9
NSN: 3110-00-100-8525
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: 26267 — SUTTON-LANDIS SHOE MACHINERY CO
SPECIFICATIONS
materialSTEEL OVERALL
alignment_typeRIGID
overall_height0.6250 INCHES NOMINAL IN
surface_finishGROUND
special_featuresRETAINERLESS TYPE
style_designatorGROOVED RACE SURFACE, BANDED OD
bore_smallest_diameter1.3125 INCHES NOMINAL IN
overall_outside_diameter2.3437 INCHES NOMINAL IN
standard_tolerance_designationABEC NO.1
thrust_directional_capability_designationSINGLE
NSN3110-00-100-8525
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: LMX7-9 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE FINISH: GROUND
•
STYLE DESIGNATOR: GROOVED RACE SURFACE, BANDED OD
•
THRUST DIRECTIONAL CAPABILITY DESIGNATION: SINGLE
•
OVERALL OUTSIDE DIAMETER: 2.3437 INCHES NOMINAL IN
•
BORE SMALLEST DIAMETER: 1.3125 INCHES NOMINAL IN
•
ALIGNMENT TYPE: RIGID
TECHNICAL CHARACTERISTICS
OVERALL HEIGHT0.6250 INCHES NOMINAL IN
SURFACE FINISHGROUND
STYLE DESIGNATORGROOVED RACE SURFACE, BANDED OD
THRUST DIRECTIONAL CAPABILITY DESIGNATIONSINGLE
OVERALL OUTSIDE DIAMETER2.3437 INCHES NOMINAL IN
BORE SMALLEST DIAMETER1.3125 INCHES NOMINAL IN
ALIGNMENT TYPERIGID
SPECIAL FEATURESRETAINERLESS TYPE
STANDARD TOLERANCE DESIGNATIONABEC NO.1
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 5
5651Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
D14Reference document
Same NSN cross-reference
Reference document — Secondary reference
LMX7-903Reference document
Same NSN cross-reference
Reference document — Secondary reference
12K32-903Reference document
Same NSN cross-reference
Reference document — Secondary reference
A2314Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy LMX7-9?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LMX7-9?
LMX7-9 is a CONNECTOR,RECEPTACLE,ELECTRICAL.
What parts can replace LMX7-9?
There are 5 known substitutes for LMX7-9: 5651, D14, LMX7-903 and 2 more. Substitute compatibility should be verified for your specific system.
What is the NSN for LMX7-9?
LMX7-9 is cataloged in the U.S. Government catalog under NSN 3110-00-100-8525. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LMX7-9