PartsTable
Technical Data Sheet
Download PDF

LM67048LM67010 — BEARING,ROLLER,TAPERED

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

LM67048LM67010: BEARING,ROLLER,TAPERED.

The BEARING,ROLLER,TAPERED is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 0.4650 INCHES NOMINAL IN, cone_width: 0.6600 INCHES NOMINAL IN, bore_diameter: 1.2500 INCHES NOMINAL IN, overall_width: 0.6600 INCHES NOMINAL IN, standout_width: 0.1600 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-293-8579, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LM67048LM67010
NSN: 3110-00-293-8579
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: F0704 — THE TIMKEN COMPANY (FRA)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width0.4650 INCHES NOMINAL IN
cone_width0.6600 INCHES NOMINAL IN
bore_diameter1.2500 INCHES NOMINAL IN
overall_width0.6600 INCHES NOMINAL IN
standout_width0.1600 INCHES NOMINAL IN
style_designatorSTRAIGHT BORE, NORMAL ANGLE
cone_corner_radius0.0930 INCHES NOMINAL IN
backface_corner_radius0.0460 INCHES NOMINAL IN
overall_outside_diameter2.3280 INCHES NOMINAL IN
retainer_fabrication_methodPRESSED
standard_tolerance_designationAFBMA CLASS 4
NSN3110-00-293-8579
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: LM67048LM67010 · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
RETAINER FABRICATION METHOD: PRESSED
•
CUP WIDTH: 0.4650 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
MATERIAL DOCUMENT AND CLASSIFICATION: 66 FED STD SINGLE MATERIAL RESPONSE OVERALL
•
OVERALL OUTSIDE DIAMETER: 2.3280 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.0460 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.0930 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
RETAINER FABRICATION METHODPRESSED
CUP WIDTH0.4650 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
MATERIAL DOCUMENT AND CLASSIFICATION66 FED STD SINGLE MATERIAL RESPONSE OVERALL
OVERALL WIDTH0.6600 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER2.3280 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.0460 INCHES NOMINAL IN
CONE CORNER RADIUS0.0930 INCHES NOMINAL IN
STANDOUT WIDTH0.1600 INCHES NOMINAL IN
CONE WIDTH0.6600 INCHES NOMINAL IN
SUBSTITUTES & CROSS-REFERENCES 6
A153213ZReference document
Same NSN cross-reference
Reference document — Secondary reference
7450630Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
W13ABP038Reference document
Same NSN cross-reference
Reference document — Secondary reference
75075Reference document
Same NSN cross-reference
Reference document — Secondary reference
323W173AReference document
Same NSN cross-reference
Reference document — Secondary reference
08-202737Reference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusCancelled· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy LM67048LM67010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LM67048LM67010?
LM67048LM67010 is a BEARING,ROLLER,TAPERED.
What parts can replace LM67048LM67010?
There are 6 known substitutes for LM67048LM67010: A153213Z, 7450630, W13ABP038 and 3 more. Substitute compatibility should be verified for your specific system.
What is the NSN for LM67048LM67010?
LM67048LM67010 is cataloged in the U.S. Government catalog under NSN 3110-00-293-8579. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LM67048LM67010