PartsTable
Technical Data Sheet
Download PDF

LM451310D — CUP,TAPERED ROLLER BEARING

✓ Government record, cited
— · TAPERED BEARING
PRODUCT OVERVIEW

LM451310D: CUP,TAPERED ROLLER BEARING.

The CUP,TAPERED ROLLER BEARING is a the manufacturer tape media or drive component used in enterprise backup, archival, and disaster recovery environments. Key specifications include material: STEEL OVERALL, cup_width: 1.7500 INCHES NOMINAL IN, cone_width: 2.2500 INCHES NOMINAL IN, bore_diameter: 10.5000 INCHES NOMINAL IN, overall_width: 4.0000 INCHES NOMINAL IN, alignment_type: RIGID. This part is cataloged in the U.S.

Government catalog under NSN 3110-00-592-7182, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LM451310D
NSN: 3110-00-592-7182
NIINs: 005927182, 011808765
FSC: 3110 — Bearings, Antifriction, Unmounted
CAGE: D9182 — ZF INDUSTRIEANTRIEBE WITTEN GMBH (DEU)
SPECIFICATIONS
materialSTEEL OVERALL
cup_width1.7500 INCHES NOMINAL IN
cone_width2.2500 INCHES NOMINAL IN
bore_diameter10.5000 INCHES NOMINAL IN
overall_width4.0000 INCHES NOMINAL IN
alignment_typeRIGID
standout_width0.5000 INCHES NOMINAL IN
outside_diameter14.0000 INCHES NOMINAL IN
style_designatorDOUBLE CUP, NORMAL ANGLE
features_providedLUBRICATION HOLE AND LUBRICATION GROOVE
cone_corner_radius0.4100 INCHES NOMINAL IN
backface_corner_radius0.0600 INCHES NOMINAL IN
NSN3110-00-592-7182
COMPONENT DIAGRAM
TAPERED ROLLER BEARING — CUP & CONE ASSEMBLY CAGE CUP BORE CONE OD: — · BORE: — · WIDTH: — Single Row · PN: LM451310D · OEM ⚠ VERIFY BEFORE ORDERING Cup and cone sold separately — verify you are ordering BOTH parts or the correct component. Always replace cup and cone together — mismatched wear = premature failure ✓ BROKER TIP Taper angle determines axial load capacity. Steeper angle = higher axial load rating. Timken series numbers indicate dimensions — cross-reference carefully PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CUP WIDTH: 1.7500 INCHES NOMINAL IN
•
STYLE DESIGNATOR: STRAIGHT BORE, NORMAL ANGLE
•
OVERALL OUTSIDE DIAMETER: 14.0000 INCHES NOMINAL IN
•
BACKFACE CORNER RADIUS: 0.1300 INCHES NOMINAL IN
•
CONE CORNER RADIUS: 0.4100 INCHES NOMINAL IN
•
STANDOUT WIDTH: 0.5000 INCHES NOMINAL IN
•
CONE WIDTH: 2.2500 INCHES NOMINAL IN
TYPICAL APPLICATIONS
  • Long-term data archival and compliance retention
  • Offsite backup and disaster recovery
  • Air-gapped ransomware protection
  • Cold storage tier for infrequently accessed data
TECHNICAL CHARACTERISTICS
CUP WIDTH1.7500 INCHES NOMINAL IN
STYLE DESIGNATORSTRAIGHT BORE, NORMAL ANGLE
OVERALL WIDTH4.2500 INCHES NOMINAL IN
OVERALL OUTSIDE DIAMETER14.0000 INCHES NOMINAL IN
BACKFACE CORNER RADIUS0.1300 INCHES NOMINAL IN
CONE CORNER RADIUS0.4100 INCHES NOMINAL IN
STANDOUT WIDTH0.5000 INCHES NOMINAL IN
CONE WIDTH2.2500 INCHES NOMINAL IN
BORE DIAMETER10.5000 INCHES NOMINAL IN
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy LM451310D?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LM451310D?
LM451310D is a CUP,TAPERED ROLLER BEARING.
What is the NSN for LM451310D?
LM451310D is cataloged in the U.S. Government catalog under NSN 3110-00-592-7182. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LM451310D

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.