The MICROCIRCUIT,LINEAR is a the manufacturer industrial component. Key specifications include body_width: 0.990 INCHES MINIMUM AND 1.050 INCHES MAXIMUM IN, body_height: 0.250 INCHES MINIMUM AND 0.352 INCHES MAXIMUM IN, body_length: 1.177 INCHES MINIMUM AND 1.197 INCHES MAXIMUM IN, overall_width: 24.89 MILLIMETERS NOMINAL MM, overall_height: 10.67 MILLIMETERS NOMINAL MM, overall_length: 30.40 MILLIMETERS NOMINAL MM. This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5962-01-128-1851, indicating validated use in U.S.
government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels. Verify compatibility with your specific system configuration before ordering.
| body_width | 0.990 INCHES MINIMUM AND 1.050 INCHES MAXIMUM IN |
| body_height | 0.250 INCHES MINIMUM AND 0.352 INCHES MAXIMUM IN |
| body_length | 1.177 INCHES MINIMUM AND 1.197 INCHES MAXIMUM IN |
| overall_width | 24.89 MILLIMETERS NOMINAL MM |
| overall_height | 10.67 MILLIMETERS NOMINAL MM |
| overall_length | 30.40 MILLIMETERS NOMINAL MM |
| special_features | NUCLEAR HARDNESS CRITICAL ITEMS; FLANGE MOUNTED |
| features_provided | HERMETICALLY SEALED AND MONOLITHIC AND ADJUSTABLE AND INTERNALLY COMPENSATED |
| inclosure_material | METAL |
| storage_temp_range | -65.0 TO 150.0 CELSIUS DEGC |
| operating_temp_range | -55.0 TO 125.0 CELSIUS DEGC |
| input_circuit_pattern | 1 INPUT |
| NSN | 5962-01-128-1851 |
| TERMINAL SURFACE TREATMENT | SOLDER |
| FEATURES PROVIDED | HERMETICALLY SEALED AND MONOLITHIC AND ADJUSTABLE AND INTERNALLY COMPENSATED |
| INPUT CIRCUIT PATTERN | 1 INPUT |
| NUCLEAR HARDNESS CRITICAL FEATURE | HARDENED |
| SPECIAL FEATURES | NUCLEAR HARDNESS CRITICAL ITEMS; FLANGE MOUNTED |
| INCLOSURE CONFIGURATION | CAN |
| VOLTAGE RATING AND TYPE PER CHARACTERISTIC | 40.0 VOLTS MAXIMUM INPUT/OUTPUT DIFFERENTIAL |
| INCLOSURE MATERIAL | METAL |
| TEST DATA DOCUMENT | 14933-77034 DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) |
| DESIGN FUNCTION AND QUANTITY | 1 REGULATOR, VOLTAGE, DC |