PartsTable
Technical Data Sheet
PartsTable / COMPONENT / LL10
LL10 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The SWITCH,PRESSURE is a the manufacturer industrial component. Key specifications include material: STEEL CORROSION RESISTING BODY, leg_length: 0.560 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN, body_length: 1.620 INCHES NOMINAL IN, body_diameter: 1.560 INCHES NOMINAL IN, terminal_type: CONNECTOR, RECEPTACLE, overall_length: 1.750 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-218-4342, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LL10
NSN: 5330-00-218-4342
FSC: 5330
CAGE: 07310 — CALABRESE & SONS, INC. (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING BODY
leg_length0.560 INCHES MINIMUM AND 0.590 INCHES MAXIMUM IN
body_length1.620 INCHES NOMINAL IN
body_diameter1.560 INCHES NOMINAL IN
terminal_typeCONNECTOR, RECEPTACLE
overall_length1.750 INCHES NOMINAL IN
connection_typeTHREADED EXTERNAL PIPE FIRST FLUID END CONNECTION
mounting_methodPLUG-IN
connection_stylePLAIN ALL ENDS
outside_diameter1.560 INCHES NOMINAL SINGLE CONNECTION IN
overall_diameter1.880 INCHES NOMINAL IN
special_featuresSPLIT CONSTRUCTION DESIGN. FLANGED END COUNTERBORED 1.250 IN. DEEP BY 3.750 IN. DIA IN
NSN5330-00-218-4342
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: LL10 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: FLANGE
•
CROSS-SECTIONAL THICKNESS: 0.625 INCHES NOMINAL IN
•
MATERIAL: COPPER ALLOY OVERALL
•
CROSS-SECTIONAL HEIGHT: 1.875 INCHES NOMINAL IN
•
CENTER HOLE DIAMETER: 3.250 INCHES NOMINAL IN
•
ATTACHMENT FEATURE LENGTH: 0.938 INCHES NOMINAL IN
•
ATTACHMENT METHOD: SLOT
•
PERIPHERAL DIAMETER: 10.250 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEFLANGE
CROSS-SECTIONAL THICKNESS0.625 INCHES NOMINAL IN
MATERIALCOPPER ALLOY OVERALL
CROSS-SECTIONAL HEIGHT1.875 INCHES NOMINAL IN
CENTER HOLE DIAMETER3.250 INCHES NOMINAL IN
ATTACHMENT FEATURE LENGTH0.938 INCHES NOMINAL IN
ATTACHMENT METHODSLOT
PERIPHERAL DIAMETER10.250 INCHES NOMINAL IN
RIM SURFACE WIDTH0.688 INCHES NOMINAL IN
SPECIAL FEATURESSPLIT CONSTRUCTION DESIGN. FLANGED END COUNTERBORED 1.250 IN. DEEP BY 3.750 IN. DIA IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 15
70-4017Interchangeable
interchangeable cross-reference
interchangeable
04306-1006Interchangeable
interchangeable cross-reference
interchangeable
JVS-1A-20RAInterchangeable
interchangeable cross-reference
interchangeable
11148Interchangeable
interchangeable cross-reference
interchangeable
011148Interchangeable
interchangeable cross-reference
interchangeable
7376248Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy LL10?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LL10?
LL10 is a SWITCH,PRESSURE.
What parts can replace LL10?
There are 15 known substitutes for LL10: 70-4017, 04306-1006, JVS-1A-20RA and 12 more. Substitute compatibility should be verified for your specific system.
What is the NSN for LL10?
LL10 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-218-4342. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LL10

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026