PartsTable
Technical Data Sheet
Download PDF

LK632-1 — NUT,SELF-LOCKING,CLINCH

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

LK632-1: NUT,SELF-LOCKING,CLINCH.

The NUT,SELF-LOCKING,CLINCH is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, nut_style: CLINCH, nut_height: 0.178 INCHES NOMINAL IN, lubrication: DRY FILM LUBRICANT, pilot_length: 0.038 INCHES MAXIMUM IN, thread_class: 3B. This part is cataloged in the U.S.

Government catalog under NSN 5310-00-084-1148, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LK632-1
NSN: 5310-00-084-1148
FSC: 5310 — Nuts and Washers
CAGE: 46384 — PENN ENGINEERING & MANUFACTURING CORP (USA)
SPECIFICATIONS
materialSTEEL OVERALL
nut_styleCLINCH
nut_height0.178 INCHES NOMINAL IN
lubricationDRY FILM LUBRICANT
pilot_length0.038 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNIFIED NATIONAL COARSE (UNC)
pilot_diameter0.220 INCHES MAXIMUM IN
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
surface_treatmentCADMIUM OVERALL
width_across_flats0.312 INCHES NOMINAL IN
NSN5310-00-084-1148
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: LK632-1 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
LUBRICATION: DRY FILM LUBRICANT
•
WIDTH ACROSS FLATS: 0.312 INCHES NOMINAL IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-416,TY 2,CL C FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
THREAD SERIES: UNIFIED NATIONAL COARSE (UNC)
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.138 INCHES IN
•
PILOT DIAMETER: 0.220 INCHES MAXIMUM IN
•
PILOT LENGTH: 0.038 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
LUBRICATIONDRY FILM LUBRICANT
WIDTH ACROSS FLATS0.312 INCHES NOMINAL IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-416,TY 2,CL C FED SPEC SINGLE TREATMENT RESPONSE OVERALL
THREAD SERIESUNIFIED NATIONAL COARSE (UNC)
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.138 INCHES IN
PILOT DIAMETER0.220 INCHES MAXIMUM IN
PILOT LENGTH0.038 INCHES MAXIMUM IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
NUT HEIGHT0.178 INCHES NOMINAL IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy LK632-1?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LK632-1?
LK632-1 is a NUT,SELF-LOCKING,CLINCH.
What is the NSN for LK632-1?
LK632-1 is cataloged in the U.S. Government catalog under NSN 5310-00-084-1148. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LK632-1