PartsTable
Technical Data Sheet
Download PDF

LK24 — CLAMP,HOSE

✓ Government record, cited
— · HOSE FITTING
PRODUCT OVERVIEW

LK24: CLAMP,HOSE.

The CLAMP,HOSE is a the manufacturer industrial component. Key specifications include material: STEEL OVERALL, overall_width: 0.500 INCHES NOMINAL IN, inside_diameter: 2.250 INCHES MINIMUM AND 2.344 INCHES MAXIMUM IN, special_features: SUPPORTS GRUMMAN A-10 AIRCRAFT, style_designator: WIRE, fastening_device_type: SLOTTED HEXAGON HEAD SCREW. This part is cataloged in the U.S.

Government catalog under NSN 4730-00-454-5041, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LK24
NSN: 4730-00-454-5041
FSC: 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
CAGE: 66289 — WISCONSIN MOTORS, LLC (USA)
SPECIFICATIONS
materialSTEEL OVERALL
overall_width0.500 INCHES NOMINAL IN
inside_diameter2.250 INCHES MINIMUM AND 2.344 INCHES MAXIMUM IN
special_featuresSUPPORTS GRUMMAN A-10 AIRCRAFT
style_designatorWIRE
fastening_device_typeSLOTTED HEXAGON HEAD SCREW
NSN4730-00-454-5041
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: LK24 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
FASTENING DEVICE TYPE: SLOTTED HEXAGON HEAD SCREW
•
STYLE DESIGNATOR: WIRE
•
INSIDE DIAMETER: 2.250 INCHES MINIMUM AND 2.344 INCHES MAXIMUM IN
•
MATERIAL: STEEL OVERALL
TECHNICAL CHARACTERISTICS
FASTENING DEVICE TYPESLOTTED HEXAGON HEAD SCREW
STYLE DESIGNATORWIRE
OVERALL WIDTH0.500 INCHES NOMINAL IN
INSIDE DIAMETER2.250 INCHES MINIMUM AND 2.344 INCHES MAXIMUM IN
SPECIAL FEATURESSUPPORTS GRUMMAN A-10 AIRCRAFT
MATERIALSTEEL OVERALL
SUBSTITUTES & CROSS-REFERENCES 2
75Reference document
Same NSN cross-reference
Reference document — Design control — primary reference
55928Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy LK24?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LK24?
LK24 is a CLAMP,HOSE.
What parts can replace LK24?
There are 2 known substitutes for LK24: 75, 55928. Substitute compatibility should be verified for your specific system.
What is the NSN for LK24?
LK24 is cataloged in the U.S. Government catalog under NSN 4730-00-454-5041. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LK24