PartsTable
Technical Data Sheet
Download PDF

LH2-624800 — GASKET

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

LH2-624800: GASKET.

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, overall_width: 0.750 INCHES NOMINAL IN, overall_length: 1.250 INCHES NOMINAL IN, special_features: ONE 0.625 INCH BY 0.562 INCH SLOT IN, material_document_and_classification: ZZ-R-765 FED SPEC SINGLE MATERIAL RESPONSE OVERALL. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-406-9722, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LH2-624800
NSN: 5330-01-406-9722
FSC: 5330 — Packing and Gasket Materials
CAGE: 34293 — HUNTINGTON INGALLS INCORPORATED DIV INGALLS SHIPBUILDING (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q OVERALL
overall_width0.750 INCHES NOMINAL IN
overall_length1.250 INCHES NOMINAL IN
special_featuresONE 0.625 INCH BY 0.562 INCH SLOT IN
material_document_and_classificationZZ-R-765 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
NSN5330-01-406-9722
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: LH2-624800 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
MATERIAL DOCUMENT AND CLASSIFICATION: ZZ-R-765 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
•
MATERIAL: RUBBER SILICONE CLASS Q OVERALL
TECHNICAL CHARACTERISTICS
MATERIAL DOCUMENT AND CLASSIFICATIONZZ-R-765 FED SPEC SINGLE MATERIAL RESPONSE OVERALL
OVERALL LENGTH1.250 INCHES NOMINAL IN
OVERALL WIDTH0.750 INCHES NOMINAL IN
SPECIAL FEATURESONE 0.625 INCH BY 0.562 INCH SLOT IN
MATERIALRUBBER SILICONE CLASS Q OVERALL
OTHER ITEMS IN FSC 5330 — Packing and Gasket Materials
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5330-00-000-0085 5330-00-000-0167 5330-00-000-5275 5330-00-001-1260 5330-00-001-1833 5330-00-001-1844 5330-00-001-1845 5330-00-001-1846
SUBSTITUTES & CROSS-REFERENCES 1
LHD-F59047Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Terminal item — no further procurement; issued until stock is exhaustedNo demilitarization required
Ready to buy LH2-624800?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LH2-624800?
LH2-624800 is a GASKET.
What parts can replace LH2-624800?
There is 1 known substitute for LH2-624800: LHD-F59047. Substitute compatibility should be verified for your specific system.
What is the NSN for LH2-624800?
LH2-624800 is cataloged in the U.S. Government catalog under NSN 5330-01-406-9722. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LH2-624800