PartsTable
Technical Data Sheet
Download PDF

LH11618-5 — NUT,SELF-LOCKING,DOUBLE HEXAGON

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

LH11618-5: NUT,SELF-LOCKING,DOUBLE HEXAGON.

NUT,SELF-LOCKING,DOUBLE HEXAGON. Key specifications include material: STEEL CORROSION RESISTING OVERALL, nut_style: DOUBLE HEXAGON, nut_height: 0.458 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN, thread_class: 3B, thread_series: UNIFIED NATIONAL JOINT FINE (UNJF), locking_feature: PREVAILING TORQUE ALL METAL DESIGN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-087-5756, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LH11618-5
NSN: 5310-01-087-5756
FSC: 5310 — Nuts and Washers
CAGE: 72962 — HARVARD INDUSTRIES INC (USA)
SPECIFICATIONS
materialSTEEL CORROSION RESISTING OVERALL
nut_styleDOUBLE HEXAGON
nut_height0.458 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
thread_class3B
thread_seriesUNIFIED NATIONAL JOINT FINE (UNJF)
locking_featurePREVAILING TORQUE ALL METAL DESIGN
thread_directionRIGHT-HAND
precious_materialSILVER
width_across_flats0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
nominal_thread_size0.312 INCHES IN
bearing_surface_typeCHAMFERED
thread_quantity_per_inch24
NSN5310-01-087-5756
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: LH11618-5 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
WIDTH ACROSS FLATS: 0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
•
THREAD SERIES: UNIFIED NATIONAL JOINT FINE (UNJF)
•
PRECIOUS MATERIAL: SILVER
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5709 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
THREAD DIRECTION: RIGHT-HAND
•
NOMINAL THREAD SIZE: 0.312 INCHES IN
•
LOCKING FEATURE: PREVAILING TORQUE ALL METAL DESIGN
•
NUT HEIGHT: 0.458 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
TECHNICAL CHARACTERISTICS
WIDTH ACROSS FLATS0.430 INCHES MINIMUM AND 0.439 INCHES MAXIMUM IN
THREAD SERIESUNIFIED NATIONAL JOINT FINE (UNJF)
PRECIOUS MATERIALSILVER
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5709 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
THREAD DIRECTIONRIGHT-HAND
NOMINAL THREAD SIZE0.312 INCHES IN
LOCKING FEATUREPREVAILING TORQUE ALL METAL DESIGN
NUT HEIGHT0.458 INCHES MINIMUM AND 0.473 INCHES MAXIMUM IN
NUT STYLEDOUBLE HEXAGON
THREAD CLASS3B
SUBSTITUTES & CROSS-REFERENCES 2
4037830Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
4037829Same NSN cross-reference
Same NSN cross-reference
Also cataloged under this NSN
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required
Ready to buy LH11618-5?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LH11618-5?
LH11618-5 is a NUT,SELF-LOCKING,DOUBLE HEXAGON.
What parts can replace LH11618-5?
There are 2 known substitutes for LH11618-5: 4037830, 4037829. Substitute compatibility should be verified for your specific system.
What is the NSN for LH11618-5?
LH11618-5 is cataloged in the U.S. Government catalog under NSN 5310-01-087-5756. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LH11618-5