PartsTable
Technical Data Sheet
PartsTable / COMPONENT / LER832-0406
LER832-0406 ✓ Verified by PartsTable
— · HOSE FITTING
WHAT YOU NEED TO KNOW
PTFE tape on tapered threads (NPT/BSPT) JIC/AN flare connections seal metal-to-metal — no tape
NPT != BSPT — look identical, NOT interchangeable
PRODUCT OVERVIEW

The INJECTOR ASSEMBLY,FUEL is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-12 OVERALL, leg_length: 1.430 INCHES NOMINAL FIRST END IN, seat_angle: 12.0 DEGREES ALL ENDS, thread_class: 3A ALL ENDS A, nominal_width: 1.375 INCHES ALL ENDS IN, nominal_length: 1.750 INCHES ALL ENDS IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-897-5337, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LER832-0406
NSN: 4730-00-897-5337
FSC: 4730
CAGE: 00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
materialSTEEL COMP XM-12 OVERALL
leg_length1.430 INCHES NOMINAL FIRST END IN
seat_angle12.0 DEGREES ALL ENDS
thread_class3A ALL ENDS A
nominal_width1.375 INCHES ALL ENDS IN
nominal_length1.750 INCHES ALL ENDS IN
connection_typeTHREADED EXTERNAL TUBE ALL ENDS
connection_styleEXTERNAL SEAT FOR GASKET SEAL (BOSS) FIRST END
special_featuresSUPPLIED WITH O-RING
style_designatorFLARELESS W/ CENTER WRENCHING FACILITY
surface_treatmentCADMIUM OVERALL
operating_pressure1500.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
NSN4730-00-897-5337
COMPONENT DIAGRAM
HOSE FITTING — THREAD TYPE IS CRITICAL END A: — STRAIGHT END B: — SPECIFICATIONS Thread: — Material: — Pressure: — PN: LER832-0406 · OEM ⚠ VERIFY BEFORE ORDERING NPT ≠ BSPT — tapered threads look identical but are NOT interchangeable. Wrong thread = leak. JIC (37°) ≠ AN (37°) ≠ SAE 45° — flare angles must match exactly. Measure thread pitch with gauge — visual identification is unreliable ✓ BROKER TIP Always use thread sealant (PTFE tape or pipe compound) on tapered threads (NPT/BSPT). JIC/AN flare fittings seal metal-to-metal — never use tape on flare connections PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 14
LER832D0608Interchangeable
interchangeable cross-reference
interchangeable
ER832D0608Interchangeable
interchangeable cross-reference
interchangeable
BACU24AA0405JInterchangeable
interchangeable cross-reference
interchangeable
APX832J0405Interchangeable
interchangeable cross-reference
interchangeable
BACU24AA0604JInterchangeable
interchangeable cross-reference
interchangeable
AS1007J0604Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy LER832-0406?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LER832-0406?
LER832-0406 is a INJECTOR ASSEMBLY,FUEL.
What parts can replace LER832-0406?
There are 14 known substitutes for LER832-0406: LER832D0608, ER832D0608, BACU24AA0405J and 11 more. Substitute compatibility should be verified for your specific system.
What is the NSN for LER832-0406?
LER832-0406 is cataloged in the Federal Logistics Information System (FLIS) under NSN 4730-00-897-5337. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LER832-0406

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026