PartsTable
Technical Data Sheet
PartsTable / COMPONENT / LE206146PC32
LE206146PC32 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The GASKET is a the manufacturer industrial component. Key specifications include material: RUBBER SILICONE CLASS Q OVERALL, hole_diameter: 0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN, overall_width: 1.344 INCHES MINIMUM AND 1.406 INCHES MAXIMUM IN, overall_length: 1.344 INCHES MINIMUM AND 1.406 INCHES MAXIMUM IN, hardness_rating: 45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL, style_designator: NON-CIRCULAR. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-480-3864, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LE206146PC32
NSN: 5330-00-480-3864
FSC: 5330
CAGE: 34293 — HUNTINGTON INGALLS INCORPORATED DIV INGALLS SHIPBUILDING (USA)
SPECIFICATIONS
materialRUBBER SILICONE CLASS Q OVERALL
hole_diameter0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
overall_width1.344 INCHES MINIMUM AND 1.406 INCHES MAXIMUM IN
overall_length1.344 INCHES MINIMUM AND 1.406 INCHES MAXIMUM IN
hardness_rating45.0 SHORE DUROMETER A MINIMUM AND 55.0 SHORE DUROMETER A MAXIMUM OVERALL
style_designatorNON-CIRCULAR
aperture_diameter1.178 INCHES MINIMUM AND 1.198 INCHES MAXIMUM IN
bolt_hole_quantity4
outside_corner_radius0.156 INCHES NOMINAL IN
cross-sectional_thickness0.031 INCHES NOMINAL IN
cross-sectional_shape_styleSOLID SINGLE OR COMPOSITION
material_document_and_classificationZZ-R-765 CL 3A GR 50 FED SPEC SINGLE MATERIAL RESPONSE OVERALL A
NSN5330-00-480-3864
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: LE206146PC32 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HOLE DIAMETER: 0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
CROSS-SECTIONAL SHAPE STYLE: SOLID SINGLE OR COMPOSITION
•
STYLE DESIGNATOR: NON-CIRCULAR
•
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH: 1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH: 0.156 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: ZZ-R-765 CL 3A GR 50 FED SPEC SINGLE MATERIAL RESPONSE OVERALL A
•
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH: 0.156 INCHES NOMINAL IN
•
CROSS-SECTIONAL THICKNESS: 0.031 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
HOLE DIAMETER0.120 INCHES MINIMUM AND 0.140 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
CROSS-SECTIONAL SHAPE STYLESOLID SINGLE OR COMPOSITION
STYLE DESIGNATORNON-CIRCULAR
CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH1.052 INCHES MINIMUM AND 1.072 INCHES MAXIMUM LOCATION NOT OTHERWISE SPECIFIED IN
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG WIDTH0.156 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONZZ-R-765 CL 3A GR 50 FED SPEC SINGLE MATERIAL RESPONSE OVERALL A
OUTSIDE EDGE TO BOLT HOLE CENTER DISTANCE ALONG LENGTH0.156 INCHES NOMINAL IN
CROSS-SECTIONAL THICKNESS0.031 INCHES NOMINAL IN
OVERALL WIDTH1.344 INCHES MINIMUM AND 1.406 INCHES MAXIMUM IN
OVERALL LENGTH1.344 INCHES MINIMUM AND 1.406 INCHES MAXIMUM IN
VERIFIED SUBSTITUTES & CROSS-REFERENCES 18
70007Interchangeable
interchangeable cross-reference
interchangeable
04306-0607Interchangeable
interchangeable cross-reference
interchangeable
MEP007AInterchangeable
interchangeable cross-reference
interchangeable
GGG-K-275Interchangeable
interchangeable cross-reference
interchangeable
58006Interchangeable
interchangeable cross-reference
interchangeable
AWL4Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy LE206146PC32?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LE206146PC32?
LE206146PC32 is a GASKET.
What parts can replace LE206146PC32?
There are 18 known substitutes for LE206146PC32: 70007, 04306-0607, MEP007A and 15 more. Substitute compatibility should be verified for your specific system.
What is the NSN for LE206146PC32?
LE206146PC32 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-00-480-3864. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LE206146PC32

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026