The ELBOW,TUBE is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-10 OVERALL, flow_angle: 90.0 DEGREES, leg_length: 2.468 INCHES MINIMUM AND 2.498 INCHES MAXIMUM ALL ENDS IN, connection_style: SWAGED W/ GROOVES (TUBE) ALL ENDS, surface_treatment: PASSIVATE OVERALL, operating_pressure: 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS. This part is cataloged in the U.S.
Government catalog under NSN 4730-00-009-2114, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
LD83065-20
NSN:4730-00-009-2114 FSC:4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings CAGE:00624 — EATON AEROQUIP LLC DBA JACKSON NORTH 1 DIV FLUID AND ELECTRICAL DISTRIBUTION (USA)
SPECIFICATIONS
material
STEEL COMP XM-10 OVERALL
flow_angle
90.0 DEGREES
leg_length
2.468 INCHES MINIMUM AND 2.498 INCHES MAXIMUM ALL ENDS IN
connection_style
SWAGED W/ GROOVES (TUBE) ALL ENDS
special_features
THE INTERNAL SURFACE OF THE PERMASWAGE END,WILL BE POLYTETRAFLOROETHYLENE COATED PER DEUTSCH CO,SPEC NO. DMCPS1009,TO 0.325 IN. MIN 0.350 IN. MAX,INTO THE FITTING BORE IN
surface_treatment
PASSIVATE OVERALL
operating_pressure
3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
material_document_and_classification
AMS 5656 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
nominal_outside_diameter_tube_accommodated
1.250 INCHES ALL ENDS IN
surface_treatment_document_and_classification
MIL-F-14072,E300,TY2 MIL SPEC SINGLE TREATMENT RESPONSE OUTSIDE
tubing_wall_nominal_thickness_for_which_designed
0.063 INCHES ALL ENDS IN
NSN
4730-00-009-2114
COMPONENT DIAGRAM
KEY FEATURES
•
FLOW ANGLE: 90.0 DEGREES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE INSIDE
•
CONNECTION STYLE: SWAGED W/ GROOVES (TUBE) ALL ENDS
•
TUBING WALL NOMINAL THICKNESS FOR WHICH DESIGNED: 0.063 INCHES ALL ENDS IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5656 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED: 1.250 INCHES ALL ENDS IN
•
OPERATING PRESSURE: 3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
TECHNICAL CHARACTERISTICS
FLOW ANGLE
90.0 DEGREES
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-S-5002 MIL SPEC SINGLE TREATMENT RESPONSE INSIDE
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION
MIL-F-14072,E300,TY2 MIL SPEC SINGLE TREATMENT RESPONSE OUTSIDE
CONNECTION STYLE
SWAGED W/ GROOVES (TUBE) ALL ENDS
TUBING WALL NOMINAL THICKNESS FOR WHICH DESIGNED
0.063 INCHES ALL ENDS IN
MATERIAL DOCUMENT AND CLASSIFICATION
AMS 5656 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
NOMINAL OUTSIDE DIAMETER TUBE ACCOMMODATED
1.250 INCHES ALL ENDS IN
OPERATING PRESSURE
3000.0 POUNDS PER SQUARE INCH (PSI) MAXIMUM SINGLE RESPONSE LBS
LEG LENGTH
2.468 INCHES MINIMUM AND 2.498 INCHES MAXIMUM ALL ENDS IN
SPECIAL FEATURES
THE INTERNAL SURFACE OF THE PERMASWAGE END,WILL BE POLYTETRAFLOROETHYLENE COATED PER DEUTSCH CO,SPEC NO. DMCPS1009,TO 0.325 IN. MIN 0.350 IN. MAX,INTO THE FITTING BORE IN
OTHER ITEMS IN FSC 4730 — Hose, Pipe, Tube, Lubrication, and Railing Fittings
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LD83065-20?
LD83065-20 is a ELBOW,TUBE.
What parts can replace LD83065-20?
There are 2 known substitutes for LD83065-20: H9856-20, D9856-20. Substitute compatibility should be verified for your specific system.
What is the NSN for LD83065-20?
LD83065-20 is cataloged in the U.S. Government catalog under NSN 4730-00-009-2114. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.