PartsTable
Technical Data Sheet
Download PDF

LD153-0026-0009 — WASHER,KEY

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

LD153-0026-0009: WASHER,KEY.

The WASHER,KEY is a the manufacturer industrial component. Key specifications include material: STEEL COMP XM-13 OVERALL, hole_diameter: 0.550 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN, outside_diameter: 1.062 INCHES NOMINAL IN, special_features: TWO EXTERNAL PRE BENT KEYS 180 DEGREES APART, surface_treatment: PASSIVATE OVERALL, material_thickness: 0.093 INCHES NOMINAL IN. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-193-6900, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LD153-0026-0009
NSN: 5310-01-193-6900
FSC: 5310 — Nuts and Washers
CAGE: 43999 — THE BOEING COMPANY DIV LEGACY AM&M (USA)
SPECIFICATIONS
materialSTEEL COMP XM-13 OVERALL
hole_diameter0.550 INCHES MINIMUM AND 0.560 INCHES MAXIMUM IN
outside_diameter1.062 INCHES NOMINAL IN
special_featuresTWO EXTERNAL PRE BENT KEYS 180 DEGREES APART
surface_treatmentPASSIVATE OVERALL
material_thickness0.093 INCHES NOMINAL IN
external_prebent_key_length0.157 INCHES NOMINAL IN
internal_straight_key_width0.115 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
material_document_and_classificationAMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
distance_from_centerline_to_inside_of_prebent_key0.346 INCHES MINIMUM AND 0.351 INCHES MAXIMUM IN
NSN5310-01-193-6900
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: LD153-0026-0009 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
INTERNAL STRAIGHT KEY WIDTH: 0.115 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
•
DISTANCE FROM CENTERLINE TO INSIDE OF PREBENT KEY: 0.346 INCHES MINIMUM AND 0.351 INCHES MAXIMUM IN
•
EXTERNAL PREBENT KEY LENGTH: 0.157 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.062 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.093 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
INTERNAL STRAIGHT KEY WIDTH0.115 INCHES MINIMUM AND 0.120 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONQQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE OVERALL
DISTANCE FROM CENTERLINE TO INSIDE OF PREBENT KEY0.346 INCHES MINIMUM AND 0.351 INCHES MAXIMUM IN
EXTERNAL PREBENT KEY LENGTH0.157 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONAMS 5629 ASSN STD SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.062 INCHES NOMINAL IN
MATERIAL THICKNESS0.093 INCHES NOMINAL IN
SPECIAL FEATURESTWO EXTERNAL PRE BENT KEYS 180 DEGREES APART
SURFACE TREATMENTPASSIVATE OVERALL
MATERIALSTEEL COMP XM-13 OVERALL
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy LD153-0026-0009?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LD153-0026-0009?
LD153-0026-0009 is a WASHER,KEY.
What is the NSN for LD153-0026-0009?
LD153-0026-0009 is cataloged in the U.S. Government catalog under NSN 5310-01-193-6900. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LD153-0026-0009

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.