PartsTable
Technical Data Sheet
Download PDF

LD153-0016-1010 — WASHER,RECESSED

✓ Government record, cited
— · NUT WASHER
PRODUCT OVERVIEW

LD153-0016-1010: WASHER,RECESSED.

The WASHER,RECESSED is a the manufacturer industrial component. Key specifications include material: STEEL COMP 4130 OVERALL, recess_angle: 90.0 DEGREES NOMINAL, hole_diameter: 0.631 INCHES MINIMUM AND 0.643 INCHES MAXIMUM IN, recess_diameter: 0.765 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN, outside_diameter: 1.218 INCHES NOMINAL IN, style_designator: RECESSED. This part is cataloged in the U.S.

Government catalog under NSN 5310-01-237-3879, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LD153-0016-1010
NSN: 5310-01-237-3879
FSC: 5310 — Nuts and Washers
CAGE: 43999 — THE BOEING COMPANY DIV LEGACY AM&M (USA)
SPECIFICATIONS
materialSTEEL COMP 4130 OVERALL
recess_angle90.0 DEGREES NOMINAL
hole_diameter0.631 INCHES MINIMUM AND 0.643 INCHES MAXIMUM IN
recess_diameter0.765 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN
outside_diameter1.218 INCHES NOMINAL IN
style_designatorRECESSED
surface_treatmentNICKEL AND ZINC OVERALL
material_thickness0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
minimum_tensile_strength180000 POUNDS PER SQUARE INCH LBS
material_document_and_classificationMIL-S-18729,COND N MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6758 COND D4 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6758 COND D1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
surface_treatment_document_and_classificationLA0109-005,FSCM 43999 MFR REF SINGLE TREATMENT RESPONSE OVERALL
NSN5310-01-237-3879
COMPONENT DIAGRAM
NUT & WASHER — GRADE MATCHING REQUIRED Hex NUT CROSS-SECTION WASHER OD: — SIZE: — MATERIAL: — PN: LD153-0016-1010 · OEM ⚠ VERIFY BEFORE ORDERING Grade matters for torque spec — don't mix grades. A Grade 5 nut on a Grade 8 bolt weakens the joint. Lock nuts, wing nuts, and castle nuts are NOT interchangeable with standard hex ✓ BROKER TIP Match nut to bolt thread class and material. Stainless bolt + zinc nut = galvanic corrosion. Always verify finish matches (plain, zinc, hot-dip galvanized) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: LA0109-005,FSCM 43999 MFR REF SINGLE TREATMENT RESPONSE OVERALL
•
STYLE DESIGNATOR: RECESSED
•
MATERIAL DOCUMENT AND CLASSIFICATION: MIL-S-18729,COND N MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6758 COND D4 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6758 COND D1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
•
OUTSIDE DIAMETER: 1.218 INCHES NOMINAL IN
•
MATERIAL THICKNESS: 0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
•
RECESS DIAMETER: 0.765 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN
•
SURFACE TREATMENT: NICKEL AND ZINC OVERALL
•
MINIMUM TENSILE STRENGTH: 180000 POUNDS PER SQUARE INCH LBS
TECHNICAL CHARACTERISTICS
SURFACE TREATMENT DOCUMENT AND CLASSIFICATIONLA0109-005,FSCM 43999 MFR REF SINGLE TREATMENT RESPONSE OVERALL
STYLE DESIGNATORRECESSED
MATERIAL DOCUMENT AND CLASSIFICATIONMIL-S-18729,COND N MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6758 COND D4 MIL SPEC SINGLE MATERIAL RESPONSE OR MIL-S-6758 COND D1 MIL SPEC SINGLE MATERIAL RESPONSE OVERALL
OUTSIDE DIAMETER1.218 INCHES NOMINAL IN
MATERIAL THICKNESS0.075 INCHES MINIMUM AND 0.085 INCHES MAXIMUM IN
RECESS DIAMETER0.765 INCHES MINIMUM AND 0.785 INCHES MAXIMUM IN
SURFACE TREATMENTNICKEL AND ZINC OVERALL
MINIMUM TENSILE STRENGTH180000 POUNDS PER SQUARE INCH LBS
MATERIALSTEEL COMP 4130 OVERALL
HOLE DIAMETER0.631 INCHES MINIMUM AND 0.643 INCHES MAXIMUM IN
OTHER ITEMS IN FSC 5310 — Nuts and Washers
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
5310-00-000-0040 5310-00-000-0077 5310-00-000-0079 5310-00-000-1146 5310-00-000-3815 5310-00-000-4532 5310-00-000-4540
SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy LD153-0016-1010?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LD153-0016-1010?
LD153-0016-1010 is a WASHER,RECESSED.
What is the NSN for LD153-0016-1010?
LD153-0016-1010 is cataloged in the U.S. Government catalog under NSN 5310-01-237-3879. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LD153-0016-1010

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.