LD111-0059-1101 — BOLT,ASSEMBLED WASHER

✓ Government record, cited

— · BOLT SCREW

PRODUCT OVERVIEW

LD111-0059-1101: BOLT,ASSEMBLED WASHER.

The BOLT,ASSEMBLED WASHER is a the manufacturer industrial component. Key specifications include material: IRON ALLOY 660 FASTENER, head_style: HEXAGON, head_height: 0.109 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN, thread_class: 3A A, thread_length: 0.451 INCHES MINIMUM AND 0.511 INCHES MAXIMUM IN, fastener_length: 1.091 INCHES MINIMUM AND 1.121 INCHES MAXIMUM IN. This part is cataloged in the U.S.

Government catalog under NSN 5306-01-268-8809, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS

LD111-0059-1101

NSN: 5306-01-268-8809
FSC: 5306 — Bolts
CAGE: 43999 — THE BOEING COMPANY DIV LEGACY AM&M (USA)

SPECIFICATIONS

material	IRON ALLOY 660 FASTENER
head_style	HEXAGON
head_height	0.109 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
thread_class	3A A
thread_length	0.451 INCHES MINIMUM AND 0.511 INCHES MAXIMUM IN
fastener_length	1.091 INCHES MINIMUM AND 1.121 INCHES MAXIMUM IN
washer_quantity	1
special_features	ALSO CONTAINS TAB,CORROSION RESISTANT STEEL COMP 301 PER MIL-S-5059,PASSIVATED
thread_direction	RIGHT-HAND
surface_treatment	PASSIVATE STAND-OFF
width_between_flats	0.367 INCHES MINIMUM AND 0.376 INCHES MAXIMUM IN
primary_washer_style	FINISHING
NSN	5306-01-268-8809

COMPONENT DIAGRAM

KEY FEATURES

•

HEAD HEIGHT: 0.109 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN

•

FASTENER LENGTH: 1.091 INCHES MINIMUM AND 1.121 INCHES MAXIMUM IN

•

SURFACE TREATMENT DOCUMENT AND CLASSIFICATION: QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER

•

PRIMARY WASHER OUTSIDE DIAMETER: 0.420 INCHES NOMINAL IN

•

THREAD LENGTH: 0.451 INCHES MINIMUM AND 0.511 INCHES MAXIMUM IN

•

MATERIAL DOCUMENT AND CLASSIFICATION: AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER

TECHNICAL CHARACTERISTICS

HEAD HEIGHT	0.109 INCHES MINIMUM AND 0.640 INCHES MAXIMUM IN
FASTENER LENGTH	1.091 INCHES MINIMUM AND 1.121 INCHES MAXIMUM IN
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE PRIMARY WASHER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE FASTENER
SURFACE TREATMENT DOCUMENT AND CLASSIFICATION	QQ-P-35 FED SPEC SINGLE TREATMENT RESPONSE STAND-OFF
PRIMARY WASHER OUTSIDE DIAMETER	0.420 INCHES NOMINAL IN
THREAD LENGTH	0.451 INCHES MINIMUM AND 0.511 INCHES MAXIMUM IN
MATERIAL DOCUMENT AND CLASSIFICATION	AMS 5732 ASSN STD SINGLE MATERIAL RESPONSE OR AMS 5737 ASSN STD SINGLE MATERIAL RESPONSE FASTENER
MATERIAL DOCUMENT AND CLASSIFICATION	ASTM A582 ASSN STD SINGLE MATERIAL RESPONSE PRIMARY WASHER
MATERIAL DOCUMENT AND CLASSIFICATION	MIL-S-5059 MIL SPEC SINGLE MATERIAL RESPONSE STAND-OFF

OTHER ITEMS IN FSC 5306 — Bolts

Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.

5306-00-001-1276 5306-00-001-1949 5306-00-001-1988 5306-00-001-1989 5306-00-001-1990 5306-00-001-1991 5306-00-001-1993 5306-00-001-2017

SUBSTITUTES & CROSS-REFERENCES

No substitute or cross-reference records for this part.

LIFECYCLE

NSN statusActive· U.S. Government catalog

Acquisition advice: Insurance item — stocked against contingency demandNo demilitarization required

Ready to buy LD111-0059-1101?

Compare prices from verified sellers on eBay

Buy on eBay →

As an eBay Partner, PartsTable may earn a commission. Your price is not affected.

FREQUENTLY ASKED QUESTIONS

What is LD111-0059-1101?

LD111-0059-1101 is a BOLT,ASSEMBLED WASHER.

What is the NSN for LD111-0059-1101?

LD111-0059-1101 is cataloged in the U.S. Government catalog under NSN 5306-01-268-8809. This indicates validated use in U.S. government and defense supply chains.

Community Feedback

LD111-0059-1101 — BOLT,ASSEMBLED WASHER

Request a Quote — LD111-0059-1101