PartsTable
Technical Data Sheet
Download PDF

LC11388 NON-ASBESTOS — GASKET,SPIRAL WOUND

✓ Government record, cited
— · ORING SEAL
PRODUCT OVERVIEW

LC11388 NON-ASBESTOS: GASKET,SPIRAL WOUND.

The GASKET,SPIRAL WOUND is a the manufacturer industrial component. Key specifications include outside_diameter: 1.807 INCHES NOMINAL IN, special_features: CONTAINS NON-ASBESTOS MATERIAL, style_designator: CIRCULAR, aperture_diameter: 1.375 INCHES NOMINAL IN, cross-sectional_thickness: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN, cross-sectional_shape_style: METAL WINDING W/ SOFT FILLER. This part is cataloged in the U.S.

Government catalog under NSN 5330-01-440-8057, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LC11388 NON-ASBESTOS
NSN: 5330-01-440-8057
FSC: 5330 — Packing and Gasket Materials
CAGE: 14959 — CRANE CO DIV VALVE DIV (USA)
SPECIFICATIONS
outside_diameter1.807 INCHES NOMINAL IN
special_featuresCONTAINS NON-ASBESTOS MATERIAL
style_designatorCIRCULAR
aperture_diameter1.375 INCHES NOMINAL IN
cross-sectional_thickness0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
cross-sectional_shape_styleMETAL WINDING W/ SOFT FILLER
environmental_attribute_codeASBESTOS ALTERNATIVE PRODUCTS
NSN5330-01-440-8057
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: LC11388 NON-ASBESTOS MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL THICKNESS: 0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
•
STYLE DESIGNATOR: CIRCULAR
•
CROSS-SECTIONAL SHAPE STYLE: METAL WINDING W/ SOFT FILLER
•
OUTSIDE DIAMETER: 1.807 INCHES NOMINAL IN
•
APERTURE DIAMETER: 1.375 INCHES NOMINAL IN
•
ENVIRONMENTAL ATTRIBUTE CODE: ASBESTOS ALTERNATIVE PRODUCTS
TECHNICAL CHARACTERISTICS
CROSS-SECTIONAL THICKNESS0.120 INCHES MINIMUM AND 0.130 INCHES MAXIMUM IN
STYLE DESIGNATORCIRCULAR
CROSS-SECTIONAL SHAPE STYLEMETAL WINDING W/ SOFT FILLER
OUTSIDE DIAMETER1.807 INCHES NOMINAL IN
APERTURE DIAMETER1.375 INCHES NOMINAL IN
SPECIAL FEATURESCONTAINS NON-ASBESTOS MATERIAL
ENVIRONMENTAL ATTRIBUTE CODEASBESTOS ALTERNATIVE PRODUCTS
SUBSTITUTES & CROSS-REFERENCES 2
LC11388Reference document
Same NSN cross-reference
Reference document — Advisory reference — outside the item-of-supply concept
54-30-9519 NON-ASBESTOSReference document
Same NSN cross-reference
Reference document — Secondary reference
LIFECYCLE
NSN statusActive· U.S. Government catalog
Acquisition advice: Normally procured from the manufacturer (OEM)No demilitarization required
Ready to buy LC11388 NON-ASBESTOS?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LC11388 NON-ASBESTOS?
LC11388 NON-ASBESTOS is a GASKET,SPIRAL WOUND.
What parts can replace LC11388 NON-ASBESTOS?
There are 2 known substitutes for LC11388 NON-ASBESTOS: LC11388, 54-30-9519 NON-ASBESTOS. Substitute compatibility should be verified for your specific system.
What is the NSN for LC11388 NON-ASBESTOS?
LC11388 NON-ASBESTOS is cataloged in the U.S. Government catalog under NSN 5330-01-440-8057. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LC11388 NON-ASBESTOS

✓ PartsTable — the parts reference. Every fact cited to its source.
PartsTable Design LLC · partstable.com
U.S. Government catalog: edition PUBLOGDVD v12.0.0 (OCT 2026), edition date 2026-10-01, retrieved 2026-10-18.
PartsTable commercial catalog: edition Unified commercial catalog snapshot through 2026-09-28, edition date not on file, retrieved 2026-09-28.