The SLIDE,DRAWER,EXTENSION is a the manufacturer industrial component. Key specifications include width: 2.78 INCHES NOMINAL IN, height: 0.94 INCHES NOMINAL IN, material: STEEL OVERALL, closed_length: 10.87 INCHES MINIMUM AND 11.13 INCHES MAXIMUM IN, load_capacity: 605.0 POUNDS NOMINAL LBS, extended_length: 21.00 INCHES NOMINAL IN. This part is cataloged in the U.S.
Government catalog under NSN 5340-01-623-7561, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.
Verify compatibility with your specific system configuration before ordering.
WHERE IT FITS
LBS-22-10-LO
NSN:5340-01-623-7561 FSC:5340 — Hardware, Commercial CAGE:06666 — GENERAL DEVICES CO INC (USA)
SPECIFICATIONS
width
2.78 INCHES NOMINAL IN
height
0.94 INCHES NOMINAL IN
material
STEEL OVERALL
closed_length
10.87 INCHES MINIMUM AND 11.13 INCHES MAXIMUM IN
load_capacity
605.0 POUNDS NOMINAL LBS
extended_length
21.00 INCHES NOMINAL IN
mounting_method
UNTHREADED HOLE(S)
special_features
SLIDES TO BE SHIPPED WITH SPECIAL 0.94"MAX HEAD HEIGHT,NO.8-32X3/8 PHILLIPS PAN HEAD SCREWS AND SELF-LOCKING NUTS FOR MOUNTING ONE SET OF SLIDES
style_designator
3 - MEMBER
surface_treatment
ZINC OVERALL
end_item_identification
2350-01-305-0028
side_for_which_designed
LEFT HAND OR RIGHT HAND
NSN
5340-01-623-7561
COMPONENT DIAGRAM
KEY FEATURES
•
EXTENDED LENGTH: 21.00 INCHES NOMINAL IN
•
MOUNTING METHOD: UNTHREADED HOLE(S)
•
STYLE DESIGNATOR: 3 - MEMBER
•
HEIGHT: 0.94 INCHES NOMINAL IN
•
CLOSED LENGTH: 10.87 INCHES MINIMUM AND 11.13 INCHES MAXIMUM IN
•
SURFACE TREATMENT: ZINC OVERALL
•
WIDTH: 2.78 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS
EXTENDED LENGTH
21.00 INCHES NOMINAL IN
MOUNTING METHOD
UNTHREADED HOLE(S)
STYLE DESIGNATOR
3 - MEMBER
HEIGHT
0.94 INCHES NOMINAL IN
CLOSED LENGTH
10.87 INCHES MINIMUM AND 11.13 INCHES MAXIMUM IN
SPECIAL FEATURES
SLIDES TO BE SHIPPED WITH SPECIAL 0.94"MAX HEAD HEIGHT,NO.8-32X3/8 PHILLIPS PAN HEAD SCREWS AND SELF-LOCKING NUTS FOR MOUNTING ONE SET OF SLIDES
SURFACE TREATMENT
ZINC OVERALL
WIDTH
2.78 INCHES NOMINAL IN
PART NAME ASSIGNED BY CONTROLLING AGENCY
CHASSIS SLIDE,LINEAR BALL BEARING
END ITEM IDENTIFICATION
2350-01-305-0028
OTHER ITEMS IN FSC 5340 — Hardware, Commercial
Items in the same Federal Supply class. No interchangeability or substitution relationship is implied.
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LBS-22-10-LO?
LBS-22-10-LO is a SLIDE,DRAWER,EXTENSION.
What parts can replace LBS-22-10-LO?
There is 1 known substitute for LBS-22-10-LO: 13041530. Substitute compatibility should be verified for your specific system.
What is the NSN for LBS-22-10-LO?
LBS-22-10-LO is cataloged in the U.S. Government catalog under NSN 5340-01-623-7561. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.