PartsTable
Technical Data Sheet
PartsTable / COMPONENT / LAK11-16SHAFTDIAMETER
LAK11-16SHAFTDIAMETER ✓ Verified by PartsTable
— · BALL BEARING
WHAT YOU NEED TO KNOW
2RS = sealed for life, ZZ = shielded re-greaseable ABEC grade: higher = tighter tolerance
ABEC-1 standard, ABEC-7+ for precision spindles
PRODUCT OVERVIEW

The CABLE ASSEMBLY,RADIO FREQUENCY is a the manufacturer cable assembly designed for reliable internal or external connectivity in enterprise server and storage environments. Key specifications include material: STEEL SEAL, seal_type: LABYRINTH, block_type: FIXED, base_length: 1.6094 INCHES NOMINAL IN, bore_diameter: 0.6875 INCHES NOMINAL IN, housing_width: 4.7500 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 3130-00-190-9362, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LAK11-16SHAFTDIAMETER
NSN: 3130-00-190-9362
FSC: 3130
CAGE: 21335 — TIMKEN CO DIV THE TIMKEN COMPANY (USA)
SPECIFICATIONS
materialSTEEL SEAL
seal_typeLABYRINTH
block_typeFIXED
base_length1.6094 INCHES NOMINAL IN
bore_diameter0.6875 INCHES NOMINAL IN
housing_width4.7500 INCHES NOMINAL IN
seal_locationBOTH ENDS
alignment_typeSELF-ALIGNING
base_thickness0.5000 INCHES NOMINAL IN
housing_height2.1250 INCHES NOMINAL IN
shaft_end_typeOPEN
collar_locationONE END
NSN3130-00-190-9362
COMPONENT DIAGRAM
BALL BEARING — SEAL TYPE DETERMINES MAINTENANCE OD: — · BORE: — · WIDTH: — SEAL: Open · PN: LAK11-16SHAFTDIAMETER · OEM ⚠ VERIFY BEFORE ORDERING ABEC grade: higher = tighter tolerance = higher cost. ABEC-1 is standard, ABEC-7+ for precision spindles. Open, shielded (ZZ), and sealed (2RS) versions have different max RPM ratings ✓ BROKER TIP 2RS = sealed for life (no maintenance). ZZ = shielded, re-greaseable. Open = must lubricate on install. Common interchange: 6205-2RS = 6205-2RSR = 6205-DDU (same bearing, different suffix) PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE: 1.0625 INCHES NOMINAL IN
•
LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE: 90.0 DEGREES NOMINAL
•
HOUSING HEIGHT: 2.1250 INCHES NOMINAL IN
•
HOUSING WIDTH: 4.7500 INCHES NOMINAL IN
•
SEAL LOCATION: BOTH ENDS
•
LOAD CAPABILITY TYPE: RADIAL
•
BORE DIAMETER: 0.6875 INCHES NOMINAL IN
•
MATERIAL: IRON CAST HOUSING
TYPICAL APPLICATIONS
  • Server Internal Cabling
  • Data Center Cable Infrastructure
  • SAS/SATA Drive Connectivity
TECHNICAL CHARACTERISTICS (FLIS)
HEIGHT FROM BOTTOM OF BASE TO BORE CENTERLINE1.0625 INCHES NOMINAL IN
LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE90.0 DEGREES NOMINAL
HOUSING HEIGHT2.1250 INCHES NOMINAL IN
HOUSING WIDTH4.7500 INCHES NOMINAL IN
SEAL LOCATIONBOTH ENDS
LOAD CAPABILITY TYPERADIAL
BORE DIAMETER0.6875 INCHES NOMINAL IN
MATERIALIRON CAST HOUSING
LUBRICATION MATERIALGREASE
SEAL LOCATIONBOTH ENDS
VERIFIED SUBSTITUTES & CROSS-REFERENCES 22
10082360Interchangeable
interchangeable cross-reference
interchangeable
MS90728-6Interchangeable
interchangeable cross-reference
interchangeable
803-5959276-06Interchangeable
interchangeable cross-reference
interchangeable
2560297Interchangeable
interchangeable cross-reference
interchangeable
P9618545-1Interchangeable
interchangeable cross-reference
interchangeable
743458Interchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy LAK11-16SHAFTDIAMETER?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LAK11-16SHAFTDIAMETER?
LAK11-16SHAFTDIAMETER is a CABLE ASSEMBLY,RADIO FREQUENCY.
What parts can replace LAK11-16SHAFTDIAMETER?
There are 22 known substitutes for LAK11-16SHAFTDIAMETER: 10082360, MS90728-6, 803-5959276-06 and 19 more. Substitute compatibility should be verified for your specific system.
What is the NSN for LAK11-16SHAFTDIAMETER?
LAK11-16SHAFTDIAMETER is cataloged in the Federal Logistics Information System (FLIS) under NSN 3130-00-190-9362. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LAK11-16SHAFTDIAMETER

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026