PartsTable
Technical Data Sheet
PartsTable / COMPONENT / LA31-41125 ITEM 15
LA31-41125 ITEM 15 ✓ Verified by PartsTable
— · ORING SEAL
WHAT YOU NEED TO KNOW
Material determines chemical compatibility Standard durometer is 70 Shore A
Wrong material = catastrophic seal failure
PRODUCT OVERVIEW

The RING,WIPER is a the manufacturer industrial component. Key specifications include material: UNABLE TO DECODE, ring_style: CONCENTRIC, inside_diameter: 0.500 INCHES NOMINAL IN, outside_diameter: 0.652 INCHES NOMINAL IN, special_features: MATERIALS T46 BRONZE AND TURCON VIRGIN FILLED PTFE;FA FLUORACARBON, material_thickness: 0.126 INCHES NOMINAL IN. This product is currently in active production with full OEM support.

This part is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-479-1712, indicating validated use in U.S. government and defense logistics supply chains. Available through authorized enterprise resellers and TPM (Third Party Maintenance) channels.

Verify compatibility with your specific system configuration before ordering.

WHERE IT FITS
LA31-41125 ITEM 15
NSN: 5330-01-479-1712
FSC: 5330
CAGE: 07270 — MOOG INC. DBA AMPAC-ISP CORP (USA)
SPECIFICATIONS
materialUNABLE TO DECODE
ring_styleCONCENTRIC
inside_diameter0.500 INCHES NOMINAL IN
outside_diameter0.652 INCHES NOMINAL IN
special_featuresMATERIALS T46 BRONZE AND TURCON VIRGIN FILLED PTFE;FA FLUORACARBON
material_thickness0.126 INCHES NOMINAL IN
outer_edge_thickness0.076 INCHES NOMINAL IN
cross-sectional_shape_styleOUTSIDE GROOVED, STRAIGHT FACE
material_document_and_classificationUNABLE TO DECODE
NSN5330-01-479-1712
COMPONENT DIAGRAM
O-RING / SEAL — MATERIAL DETERMINES APPLICATION ID: — CROSS-SECTION CS: — SPECIFICATION Material: — Durometer: — Temp: — PN: LA31-41125 ITEM 15 MFR: OEM ⚠ VERIFY BEFORE ORDERING Wrong material = failure. Viton for oil/fuel, EPDM for water/steam, Buna-N for general purpose, Silicone for food-grade. Chemical incompatibility causes swelling, brittleness, or rapid degradation ✓ BROKER TIP Durometer (hardness) affects sealing pressure tolerance. Higher Shore A = harder = higher pressure. Standard durometer is 70A — verify if application requires different hardness PARTSTABLE TECHNICAL DRAWING — NOT TO SCALE
KEY FEATURES
•
CROSS-SECTIONAL SHAPE STYLE: OUTSIDE GROOVED, STRAIGHT FACE
•
MATERIAL: UNABLE TO DECODE
•
RING STYLE: CONCENTRIC
•
INSIDE DIAMETER: 0.500 INCHES NOMINAL IN
•
MATERIAL DOCUMENT AND CLASSIFICATION: UNABLE TO DECODE
•
OUTSIDE DIAMETER: 0.652 INCHES NOMINAL IN
•
OUTER EDGE THICKNESS: 0.076 INCHES NOMINAL IN
TECHNICAL CHARACTERISTICS (FLIS)
CROSS-SECTIONAL SHAPE STYLEOUTSIDE GROOVED, STRAIGHT FACE
MATERIALUNABLE TO DECODE
RING STYLECONCENTRIC
SPECIAL FEATURESMATERIALS T46 BRONZE AND TURCON VIRGIN FILLED PTFE;FA FLUORACARBON
INSIDE DIAMETER0.500 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
OUTSIDE DIAMETER0.652 INCHES NOMINAL IN
OUTER EDGE THICKNESS0.076 INCHES NOMINAL IN
MATERIAL THICKNESS0.126 INCHES NOMINAL IN
MATERIAL DOCUMENT AND CLASSIFICATIONUNABLE TO DECODE
VERIFIED SUBSTITUTES & CROSS-REFERENCES 7
C0688-3Interchangeable
interchangeable cross-reference
interchangeable
33679Interchangeable
interchangeable cross-reference
interchangeable
41131Interchangeable
interchangeable cross-reference
interchangeable
110 31/64Interchangeable
interchangeable cross-reference
interchangeable
1302Interchangeable
interchangeable cross-reference
interchangeable
310-RTInterchangeable
interchangeable cross-reference
interchangeable
LIFECYCLE
StatusACTIVE
AvailabilityOEM and secondary market
RoHS CompliantEAR99Not HAZMAT
Ready to buy LA31-41125 ITEM 15?
Compare prices from verified sellers on eBay
Buy on eBay →
As an eBay Partner, PartsTable may earn a commission. Your price is not affected.
FREQUENTLY ASKED QUESTIONS
What is LA31-41125 ITEM 15?
LA31-41125 ITEM 15 is a RING,WIPER.
What parts can replace LA31-41125 ITEM 15?
There are 7 known substitutes for LA31-41125 ITEM 15: C0688-3, 33679, 41131 and 4 more. Substitute compatibility should be verified for your specific system.
What is the NSN for LA31-41125 ITEM 15?
LA31-41125 ITEM 15 is cataloged in the Federal Logistics Information System (FLIS) under NSN 5330-01-479-1712. This indicates validated use in U.S. government and defense supply chains.
Community Feedback
Comments (0)
No comments yet. Be the first to share what you know.
Leave a Comment
Comments are reviewed before appearing. You will receive an email to verify before your comment appears.

Request a Quote — LA31-41125 ITEM 15

✓ Validated with multiple authoritative sources, including Government, OEM, and Certified sources.
PartsTable Design LLC · partstable.com
Last verified: July 2026